Australia/New Zealand Z-Wave module
#41
(03-20-2016, 08:26 PM)tllim Wrote:
(03-20-2016, 06:00 PM)zadok Wrote:
(03-18-2016, 05:45 PM)Crispin Wrote:
(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave.  don't mind paying a little extra for it.

A version that violates local transmission rules is completely NO use to me !!

I have received about 10 "backerkit survey" requests.  But none have the AU option listed.

Hi there - the item is certainly on my BackerKit, have you scrolled down far enough? This is the page - https://pine64.backerkit.com/backer/addons - and here is what it looks like...

[Image: ae0031f.png]

Could you please confirm how we are supposed to add this to our order without adding to our costs? I've backed the IoT package which means the z-wave board is included but my survey only has US and EU z-wave board options. I can see the AU option in the backerkit addon page however this suggests that I would need to pay an additional US$30 to get AU supported z-wave.
If your address is Australia and New Zealand, we will ship out AU version.
Hi tllim,

I sent several emails to your team via KS' private messages, KS' comment section, and shipping@PINE64.com during the past months (the first one was sent on 18-Feb), but no one got responded.   Those I sent via KS private messages are extracted below for your reference.
==========================
  • Feb 18 2016
    @Creator 
    As I live in Hong Kong, if I want to add a Z-wave module, should I choose the EU version or the US version? I did a little bit research on Internet. It seems like HK/AUS/NZ are using different MHz (919/921) than the EU(868) and the US (908), please advise.
    Also, I noticed from Backerkit that the Media Kit package will come with Acrylic/Stainless Steel Open Enclosure but the Enclosure for IOT Package was not specified. Please also confirm if the IOT package will come with the Acrylic/Stainless Steel Open Enclosure or other Enclosure type. Thanks!


  • Feb 23 2016
    @Creator
    I live in Hong Kong. If I go for a Z-wave module, which version should I choose (US/UK)? Also, which version will come with the IOT package?
    It seems like AUS/NZ/HK are using different MHz (919/921) than the EU(868) and the US(908).
    Also, I noticed from Backerkit that Media Kit will come with Acrylic/Stainless Steel Open Enclosure but no similar information for IOT Package. Please advise.
    Finally, I wanted to know the dimensions of Lipo battery so I can buy one here to fit it in the Playbox enclosure.
    Thanks!


  • Apr 2 2016
    Hi Creator,
    My last PMs sent you in Feb still don't get answered. Anyway, I have completed my survey and added an IOT package in my pledge.
    Just to remind that here in HK we need a Z-wave card with different Mhz than the EU and US types.
    It's very much appreciated if you can confirm the matter by replying the message.
    Thanks!

============================
My questions:

1) May I confirm if HK is using the same version of Z Wave as AU/NZ?

2) If yes, will you ship out AU version to our HK backers?  I have an IOT package in my pledge.

3) If you do not intend to ship appropriate version of Z wave module to HK, please help to remove the IOT kit add-on from my pledge and arrange to refund me.  My pledge then remains the following: (i) A64+ 2GB board, (ii) Wifi/BT module, (iii) Airmouse with keyboard, (iv) Acrylic Open Enclosure.  

Thanks!
  Reply
#42
Has anyone received theirs yet in OZ
  Reply
#43
Replied from Pine64 on 8-Jul saying that shipment of Z-wave module was delayed due to manufacturing issues.
  Reply
#44
I also posted this in the other Z-Wave discussion thread I could find, but I (finally) received the AU version of the Z-Wave module and ABS case and it looks like they've sorted out the issue with it not fitting in the ABS case - http://imgur.com/gallery/lTZ64

Hopefully have OpenHAB up and running soon!
  Reply
#45
(09-30-2016, 04:14 AM)KablammoNick Wrote: I also posted this in the other Z-Wave discussion thread I could find, but I (finally) received the AU version of the Z-Wave module and ABS case and it looks like they've sorted out the issue with it not fitting in the ABS case - http://imgur.com/gallery/lTZ64

Hopefully have OpenHAB up and running soon!

How do you check your Z-wave module is the AU version?
  Reply
#46
Doesn't appear to be any AU specific markings, it's just got "ZW5304_V11 2016.8.10".

I guess I'm just hoping it's the AU one because that's what I ordered.
  Reply
#47
(09-30-2016, 04:05 PM)KablammoNick Wrote: Doesn't appear to be any AU specific markings, it's just got "ZW5304_V11 2016.8.10".

I guess I'm just hoping it's the AU one because that's what I ordered.

Yes, this is the new AU Zwave model and using Sigma Designs ZM5304AH module. The reason of taking so long for AU model release is due to we cannot find of-the-shelf ZWave module like US and EU, and we need to ask a company that specialize on produce ZWave module for Raspberry Pi to build for us.

BTW, all Pine64 ZWave module (US, EU, and AU) can works on top of Raspberry Pi, consider this as bonus Big Grin  In general, RpI's ZWave module kind of expensive.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Question Z-Wave module pinout to make it compatible with Pi b+ ebretteville 59 82,662 07-12-2019, 08:55 AM
Last Post: kris240376
Sad Z-Wave and openzwave+node-openzwave-shared saro 2 6,202 09-01-2017, 05:22 AM
Last Post: saro
  Z-Wave - Full and Low Power Inclusion mode B34N 1 4,183 03-26-2017, 06:03 PM
Last Post: B34N
  KICAD Quick Lib and Module Generator mbt28 1 4,603 02-12-2017, 10:45 PM
Last Post: tllim
  Z Wave Module and still using GPIO bang 2 5,683 01-16-2017, 03:12 AM
Last Post: bang
  Z-Wave US module with adapter aegrotatio 4 7,117 01-08-2017, 12:03 AM
Last Post: aegrotatio
  RaZberry Module (z-wave) need support to get it working! Luxus 13 18,638 11-03-2016, 02:04 AM
Last Post: Luxus
  Z-Wave module problem vintagewaffle 0 2,310 10-26-2016, 10:50 AM
Last Post: vintagewaffle
  [EU] Z-Wave module tutorials? meowbot 2 5,238 09-13-2016, 07:54 PM
Last Post: Ghost
  New module: POT board Crispin 25 39,634 07-12-2016, 08:47 PM
Last Post: khgoh

Forum Jump:


Users browsing this thread: 1 Guest(s)