Australia/New Zealand Z-Wave module
#31
The "PINE64 Z-Wave Module (AU version)" already added at the Backerkit list, please make this selection.
... TL Lim
  Reply
#32
(03-10-2016, 05:47 PM)tllim Wrote: The "PINE64 Z-Wave Module (AU version)" already added at the Backerkit list, please make this selection.
... TL Lim

Thanks again for this. Just FYI: the title and frequency are correct, but the description for the BackerKit item mentions "Europe" so might put some people off.
  Reply
#33
(03-12-2016, 06:16 PM)Crispin Wrote:
(03-10-2016, 05:47 PM)tllim Wrote: The "PINE64 Z-Wave Module (AU version)" already added at the Backerkit list, please make this selection.
... TL Lim

Thanks again for this. Just FYI: the title and frequency are correct, but the description for the BackerKit item mentions "Europe" so might put some people off.

I edit from Europe version and seems like not fully edited. Thanks on point out the mistake and I will correct tomorrow when back in office.
  Reply
#34
I would require the NZ/AU version of Z Wave.  don't mind paying a little extra for it.

A version that violates local transmission rules is completely NO use to me !!

I have received about 10 "backerkit survey" requests.  But none have the AU option listed.
  Reply
#35
(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave.  don't mind paying a little extra for it.

A version that violates local transmission rules is completely NO use to me !!

I have received about 10 "backerkit survey" requests.  But none have the AU option listed.

Hi there - the item is certainly on my BackerKit, have you scrolled down far enough? This is the page - https://pine64.backerkit.com/backer/addons - and here is what it looks like...

[Image: ae0031f.png]
  Reply
#36
(03-18-2016, 05:45 PM)Crispin Wrote:
(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave.  don't mind paying a little extra for it.

A version that violates local transmission rules is completely NO use to me !!

I have received about 10 "backerkit survey" requests.  But none have the AU option listed.

Hi there - the item is certainly on my BackerKit, have you scrolled down far enough? This is the page - https://pine64.backerkit.com/backer/addons - and here is what it looks like...

[Image: ae0031f.png]

Could you please confirm how we are supposed to add this to our order without adding to our costs? I've backed the IoT package which means the z-wave board is included but my survey only has US and EU z-wave board options. I can see the AU option in the backerkit addon page however this suggests that I would need to pay an additional US$30 to get AU supported z-wave.
  Reply
#37
(03-20-2016, 06:00 PM)zadok Wrote:
(03-18-2016, 05:45 PM)Crispin Wrote:
(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave.  don't mind paying a little extra for it.

A version that violates local transmission rules is completely NO use to me !!

I have received about 10 "backerkit survey" requests.  But none have the AU option listed.

Hi there - the item is certainly on my BackerKit, have you scrolled down far enough? This is the page - https://pine64.backerkit.com/backer/addons - and here is what it looks like...

[Image: ae0031f.png]

Could you please confirm how we are supposed to add this to our order without adding to our costs? I've backed the IoT package which means the z-wave board is included but my survey only has US and EU z-wave board options. I can see the AU option in the backerkit addon page however this suggests that I would need to pay an additional US$30 to get AU supported z-wave.
If your address is Australia and New Zealand, we will ship out AU version.
  Reply
#38
(03-20-2016, 08:26 PM)tllim Wrote:
(03-20-2016, 06:00 PM)zadok Wrote:
(03-18-2016, 05:45 PM)Crispin Wrote:
(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave.  don't mind paying a little extra for it.

A version that violates local transmission rules is completely NO use to me !!

I have received about 10 "backerkit survey" requests.  But none have the AU option listed.

Hi there - the item is certainly on my BackerKit, have you scrolled down far enough? This is the page - https://pine64.backerkit.com/backer/addons - and here is what it looks like...

[Image: ae0031f.png]

Could you please confirm how we are supposed to add this to our order without adding to our costs? I've backed the IoT package which means the z-wave board is included but my survey only has US and EU z-wave board options. I can see the AU option in the backerkit addon page however this suggests that I would need to pay an additional US$30 to get AU supported z-wave.
If your address is Australia and New Zealand, we will ship out AU version.


Great, thanks.
  Reply
#39
This was not available before my backer kit was locked. Can I still get it at kickstarter pricing??
  Reply
#40
(03-23-2016, 06:09 PM)grantos Wrote: This was not available before my backer kit was locked. Can I still get it at kickstarter pricing??

Please email to support@pine64.com
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Question Z-Wave module pinout to make it compatible with Pi b+ ebretteville 59 33,913 07-12-2019, 08:55 AM
Last Post: kris240376
Sad Z-Wave and openzwave+node-openzwave-shared saro 2 2,881 09-01-2017, 05:22 AM
Last Post: saro
  Z-Wave - Full and Low Power Inclusion mode B34N 1 1,762 03-26-2017, 06:03 PM
Last Post: B34N
  KICAD Quick Lib and Module Generator mbt28 1 2,032 02-12-2017, 10:45 PM
Last Post: tllim
  Z Wave Module and still using GPIO bang 2 2,448 01-16-2017, 03:12 AM
Last Post: bang
  Z-Wave US module with adapter aegrotatio 4 2,740 01-08-2017, 12:03 AM
Last Post: aegrotatio
  RaZberry Module (z-wave) need support to get it working! Luxus 13 7,780 11-03-2016, 02:04 AM
Last Post: Luxus
  Z-Wave module problem vintagewaffle 0 1,135 10-26-2016, 10:50 AM
Last Post: vintagewaffle
  [EU] Z-Wave module tutorials? meowbot 2 2,504 09-13-2016, 07:54 PM
Last Post: Ghost
  New module: POT board Crispin 25 18,075 07-12-2016, 08:47 PM
Last Post: khgoh

Forum Jump:


Users browsing this thread: 1 Guest(s)