09-12-2021, 08:11 AM
(09-12-2021, 08:03 AM)8bit Wrote:should beCode:of=/dev/sda2
Code:of=/dev/sda
The correct information was written to the microSD card, that was simply sda # stacking up from previous usb mountings.
Jumpdrive is safely installed on the microSD card, the output(which could've prevented your misunderstanding) is the following:
39522816 bytes (40 MB, 38 MiB) copied, 4 s, 9.9 MB/s
83968+0 records in
83968+0 records out
42991616 bytes (43 MB, 41 MiB) copied, 5.0879 s, 8.4 MB/s
This indicates that it was written to a drive, while the only drive attached to any sda was the microSD card
tl:dr - still looking for suggestions on how to successfully install arch linux on my pinephone