Back to square one for the mobile on one, it doesn't survive prolonged suspend or losing network, apparently.
I went for a walk and when I go the phone out of suspend it gave a network not connected message, even though the cellular signal / operator was visible and ofonoctl said registered...
Might be linked to /usr/bin/pinephone* scripts not running correctly? Not sure who runs those...
/usr/bin/pinephone-modem-setup.sh gives errors trying to echo to /sys/bus/usb/devices/3-1 (the modem)
on my Pinephone with Manjaro Plasma Mobile the modem is on 2-1:
and
This should match
So to get eg25-manager / modem properly configured you need to modify 3-1 to 2-1 in
/usr/bin/pinephone-modem-setup-modemmanager.sh
and
/usr/bin/pinephone-modem-setup-ofono.sh
One of those at least will be run at boot and hopefully prevent weird things happening.
Be warned for now if you use the Mobile off and back on. I would probably reboot at this stage to make sure things are all configured properly (when you turn it back on).
Anyone with a better understanding of eg25-manager is more than welcome to chip in.
I'll do some more testing with suspend / resume.
I went for a walk and when I go the phone out of suspend it gave a network not connected message, even though the cellular signal / operator was visible and ofonoctl said registered...
Might be linked to /usr/bin/pinephone* scripts not running correctly? Not sure who runs those...
/usr/bin/pinephone-modem-setup.sh gives errors trying to echo to /sys/bus/usb/devices/3-1 (the modem)
on my Pinephone with Manjaro Plasma Mobile the modem is on 2-1:
Code:
cat /sys/bus/usb/devices/2-1/idVendor
2c7c
Code:
cat /sys/bus/usb/devices/2-1/idProduct
0125
Code:
lsusb
Bus 002 Device 003: ID 2c7c:0125 Quectel Wireless Solutions Co., Ltd. EC25 LTE modem
So to get eg25-manager / modem properly configured you need to modify 3-1 to 2-1 in
/usr/bin/pinephone-modem-setup-modemmanager.sh
and
/usr/bin/pinephone-modem-setup-ofono.sh
One of those at least will be run at boot and hopefully prevent weird things happening.
Be warned for now if you use the Mobile off and back on. I would probably reboot at this stage to make sure things are all configured properly (when you turn it back on).
Anyone with a better understanding of eg25-manager is more than welcome to chip in.
I'll do some more testing with suspend / resume.
Pinephone v1.2 UBports CE. Adelaide, Australia using Amaysim SIM (Optus network, VoLTE enabled) with Mobian SD card. VoLTE working also with Felix / Vodafone AU and Aldimobile / Telstra AU.
Manjaro Plasma Mobile on EMMC.
Manjaro Plasma Mobile on EMMC.