06-03-2016, 02:44 PM
thanks for bearing with me 
the command spits out:
00000000 50 48 32 00 50 48 33 00 |PH2.PH3.|
00000008
i have tested with a ready made module (that has a pi type connector, so i can't confuse the pins) and with the LM75, on which i checked the connections multiple times (because that was my first thought too).
could you maybe post what lsmod answers on your system?
if the software checks out i will have a look at the pine's hardware tomorrow, to see if i get at least a clock or anything over the bus.
the command spits out:
00000000 50 48 32 00 50 48 33 00 |PH2.PH3.|
00000008
i have tested with a ready made module (that has a pi type connector, so i can't confuse the pins) and with the LM75, on which i checked the connections multiple times (because that was my first thought too).
could you maybe post what lsmod answers on your system?
if the software checks out i will have a look at the pine's hardware tomorrow, to see if i get at least a clock or anything over the bus.
