Won't boot with 2.5GBe PCIe adaptor connected
I'm able to plug in a TP-Link Gigabit adapter and the board boots fine, but with a Diewu 2.5 gig adapter I get a hang at "booting Linux". I'm not able to get any other output (although assistance with earlyprintk/earlycon parameters is welcome)

The adapter is this one: https://www.aliexpress.com/item/4000150903887.html

I've tried both with the "stock" 2017 u-boot and with a newer 2020.07 based one, both with Armbian and ayufan images to no avail.
hotplug or boot with blacklisted module and see what happens during insertion

Possibly Related Threads…
Thread Author Replies Views Last Post
Question M.2 SSD not visible when connected via PCI-e board jimh227 4 971 07-18-2022, 10:18 PM
Last Post: zer0sig
  RockPro64 doesn't boot when PCIe to M.2 adapter is installed Cerberus 3 1,610 11-27-2021, 11:38 PM
Last Post: Cerberus
  No audio on HDMI after u-boot upgrade xlx 0 620 11-21-2021, 02:16 PM
Last Post: xlx
  RP64 Won't Boot After Power Down ColPanic_ 8 3,097 09-04-2021, 12:12 PM
Last Post: gechu
  Carte PCIe bloquant le démarrage du Noyau / PCIe card blocking Kernel boot dml-pc 4 3,062 02-17-2021, 11:35 AM
Last Post: dml-pc
  Won't boot with SATA card rjzak 4 3,881 01-09-2021, 05:56 PM
Last Post: kuleszdl
  Nvidia GPU on PCIe Jamesthetechie 4 3,242 12-22-2020, 02:54 PM
Last Post: amiraeva
  RockPro64 pcie Gpu Davidos 8 11,481 07-14-2020, 05:11 PM
Last Post: ProDigit
  rockpro 64 does not boot up automatically after software reboot rahulsharma 12 8,861 04-17-2020, 09:00 AM
Last Post: pgwipeout
  PCIe failure odhinnhrafn 11 8,587 03-16-2020, 08:39 AM
Last Post: odhinnhrafn

Forum Jump:

Users browsing this thread: 1 Guest(s)