+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: RockPro64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=102)
+--- Thread: Won't boot with 2.5GBe PCIe adaptor connected (/showthread.php?tid=11857)
Won't boot with 2.5GBe PCIe adaptor connected - voltagex - 10-18-2020
Hi,
I'm able to plug in a TP-Link Gigabit adapter and the board boots fine, but with a Diewu 2.5 gig adapter I get a hang at "booting Linux". I'm not able to get any other output (although assistance with earlyprintk/earlycon parameters is welcome)
The adapter is this one: https://www.aliexpress.com/item/4000150903887.html
I've tried both with the "stock" 2017 u-boot and with a newer 2020.07 based one, both with Armbian and ayufan images to no avail.
RE: Won't boot with 2.5GBe PCIe adaptor connected - xmixahlx - 10-20-2020
hotplug or boot with blacklisted module and see what happens during insertion