Latest Installer Image hangs after updates

[u20200719]

I used the latest 2020-Jul-16 12:26 image and was able to burn and SD card then go through the installation.  Once the installation completed and rebooted I went to the Software application and chose updates.  I got an initial error message about a Gnome component which I closed out then it showed all the updates.  I applied all the updates and rebooted.  Now it just hangs with a white/green/purple LED cycling.  I have tried this twice on two different SD cards with the same result.

Is this expected or have others noticed the same behavior?

[u20200719]

I used the latest 2020-Jul-16 12:26 image and was able to burn and SD card then go through the installation.  Once the installation completed and rebooted I went to the Software application and chose updates.  I got an initial error message about a Gnome component which I closed out then it showed all the updates.  I applied all the updates and rebooted.  Now it just hangs with a white/green/purple LED cycling.  I have tried this twice on two different SD cards with the same result.

Is this expected or have others noticed the same behavior?

Here's a video showing the install, update, and boot failure after the update.

http://www.filedropper.com/postmarketosinstaller

Downloading and copying image to SD

wget https://images.postmarketos.org/pinephon...ler.img.xz

xz -d pine64-pinephone-20200716-phosh-v20.05-installer.img.xz

md5sum pine64-pinephone-20200716-phosh-v20.05-installer.img
0a09f1c62457076241eb5c9dd6dae631  pine64-pinephone-20200716-phosh-v20.05-installer.img


sudo dd if=pine64-pinephone-20200716-phosh-v20.05-installer.img of=/dev/sdb bs=4M
895+1 records in
895+1 records out
3757047808 bytes (3.8 GB, 3.5 GiB) copied, 411.442 s, 9.1 MB/s

[firefox-58]

I used the latest 2020-Jul-16 12:26 image and was able to burn and SD card then go through the installation.  Once the installation completed and rebooted I went to the Software application and chose updates.  I got an initial error message about a Gnome component which I closed out then it showed all the updates.  I applied all the updates and rebooted.  Now it just hangs with a white/green/purple LED cycling.  I have tried this twice on two different SD cards with the same result.

Is this expected or have others noticed the same behavior?

Problem exists also here.

After the update no more boot. No screen output, display stays black here

[firefox-58]

New image available from 22-7-2020

[u20200719]

New image available from 22-7-2020

That seems to resolve it since there are no updates after loading with this installer.  The other installer worked, then failed to load after applying updates.  I'm not sure what the behavior will be if updates arrive with this version.