eMMC won't flash
#1
Received my PinePhone earlier this week.

I flashed mobian onto the eMMC last night. This morning, the phone had a solid green light, and would not boot. The LED stays green and would not boot.

Found the test*.img, and ran it.

Everything passes, except the "Flash to eMMC".

not sure what to do at this point. Any other ideas?
#2
(09-12-2020, 12:34 PM)RodMyers Wrote: Received my PinePhone earlier this week.

I flashed mobian onto the eMMC last night. This morning, the phone had a solid green light, and would not boot. The LED stays green and would not boot.

Found the test*.img, and ran it.

Everything passes, except the "Flash to eMMC".

not sure what to do at this point. Any other ideas?
Flash an SDcard and check all is well.

How did you flash eMMC? I use, and would recommend, Jumpdrive.
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
#3
(09-12-2020, 02:54 PM)dukla2000 Wrote:
(09-12-2020, 12:34 PM)RodMyers Wrote: Received my PinePhone earlier this week.

I flashed mobian onto the eMMC last night. This morning, the phone had a solid green light, and would not boot. The LED stays green and would not boot.

Found the test*.img, and ran it.

Everything passes, except the "Flash to eMMC".

not sure what to do at this point. Any other ideas?
Flash an SDcard and check all is well.

How did you flash eMMC? I use, and would recommend, Jumpdrive.


My bad.

Yes, jumpdrive and dd onto the eMMC.

Funny thing. I removed the battery, fired up the windows laptop, used etcher to finally re-flash the phone.

No idea what was going on this day, but everything now works
#4
(09-12-2020, 04:36 PM)RodMyers Wrote:
(09-12-2020, 02:54 PM)dukla2000 Wrote:
(09-12-2020, 12:34 PM)RodMyers Wrote: Received my PinePhone earlier this week.

I flashed mobian onto the eMMC last night. This morning, the phone had a solid green light, and would not boot. The LED stays green and would not boot.

Found the test*.img, and ran it.

Everything passes, except the "Flash to eMMC".

not sure what to do at this point. Any other ideas?
Flash an SDcard and check all is well.

How did you flash eMMC? I use, and would recommend, Jumpdrive.


My bad.

Yes, jumpdrive and dd onto the eMMC.

Funny thing. I removed the battery, fired up the windows laptop, used etcher to finally re-flash the phone.

No idea what was going on this day, but everything now works

I have read similar reports every so often. Seems to be a slightly bad flash which is fixed with a reflash.

I wouldn't worry about it unless it continues to happen. If it happens again, redownload your image (could be a dl error, did you verify the checksum?) and see. If it happens after all that, it's likely an emmc issue.


Possibly Related Threads…
Thread Author Replies Views Last Post
  emmc speed via usb? joe1 0 361 04-27-2024, 08:07 PM
Last Post: joe1
  eMMC upgrade EuvzO8 5 2,714 11-08-2023, 11:58 PM
Last Post: brken
  [Megapixels] Flash strobe, pictures viewer and MPCamera error 22 freelectro 3 2,577 03-27-2023, 03:27 AM
Last Post: freelectro
  RAM corruption, possible eMMC corruption alnyan 3 2,433 08-24-2022, 03:07 AM
Last Post: JeremyWadsworth
  Emmc yvan 1 1,774 07-07-2022, 08:16 AM
Last Post: Chief
  Any experiences with hardware mod to improve eMMC speeds? kqlnut 9 7,434 04-19-2022, 02:36 PM
Last Post: kk22
  Where is the Pinephone eMMc? tgz 12 13,621 02-10-2021, 06:24 PM
Last Post: dsimic
  New motherboard - ANX firmware won't flash. --- 17 15,479 12-26-2020, 01:53 PM
Last Post: p1x3l3d
  Pine phone eMMC read speeds ? bcnaz 14 16,675 11-20-2020, 02:52 AM
Last Post: LinAdmin2
  broken emmc nieral 7 10,041 08-26-2020, 09:24 AM
Last Post: nieral

Forum Jump:


Users browsing this thread: 2 Guest(s)