slarm64 (unofficial slackware) Rock64 RK3328 (aarch64)

[mara]

yes, it was necessary to specify that the "sdcard" is a "micro sd card".
thank you.
it's nice to hear that the system is working on your board.

[pineadmin]

Added Slackware Aarch64 Miniroot (ROCK64) 20180508 on Wiki and PINE64 Installer.
Added Slackware Aarch64 XFCE (ROCK64) 20180508 on Wiki and PINE64 Installer.

[mara]

Added Slackware Aarch64 Miniroot (ROCK64) 20180508 on Wiki and PINE64 Installer.
Added Slackware Aarch64 XFCE (ROCK64) 20180508 on Wiki and PINE64 Installer.

many thanks,

the only thing, since this port (aarch64) is not an official trademark of Slackware is not correctly used. The project for rebuilding Slackware under the aarch64 architecture was re-named in Slarm64, but this does not apply to assemblies on the architecture arm

[mara]

update kernel and packages
the video is played through mpv, 1080p cpu load is 89%
slack-current-aarch64-miniroot_22May18-4.4.132-rock64-build-20180526.img.tar.xz
slack-current-aarch64-miniroot_22May18-4.4.132-rock64-build-20180526.img.tar.xz.md5
slack-current-aarch64-xfce_22May18-4.4.132-rock64-build-20180526.img.tar.xz
slack-current-aarch64-xfce_22May18-4.4.132-rock64-build-20180526.img.tar.xz.md5

[mara]

update kernel and packages
graphics are displayed using mali blob gbm
slack-current-aarch64-miniroot_22May18-4.4.133-rock64-build-20180701.img.tar.xz
slack-current-aarch64-miniroot_22May18-4.4.133-rock64-build-20180701.img.tar.xz.md5
slack-current-aarch64-xfce_22May18-4.4.133-rock64-build-20180701.img.tar.xz
slack-current-aarch64-xfce_22May18-4.4.133-rock64-build-20180701.img.tar.xz.md5

[ansic]

R64 4GB wont boot with any Slackware image. Here is a loglevel=8 boot message capture: http://termbin.com/9stym

I tried to blacklist sdio/bcmdhd with a kernel parameter but either my syntax is wrong or the parameters are ignored because they do not appear in the boot log and the error remains. This is what i tried to add to uEnv.txt:

Code:

extraargs=rd.blacklist=bcmdhd module_blacklist=bcmdhd
and also
extraargs=rd.blacklist=sdio module_blacklist=sdio

[mara]

R64 4GB wont boot with any Slackware image.  Here is a loglevel=8 boot message capture: http://termbin.com/9stym

I tried to blacklist sdio/bcmdhd with a kernel parameter but either my syntax is wrong or the parameters are ignored because they do not appear in the boot log and the error remains.  This is what i tried to add to uEnv.txt:

Code:

extraargs=rd.blacklist=bcmdhd module_blacklist=bcmdhd
and also
extraargs=rd.blacklist=sdio module_blacklist=sdio

the rtl8188eu, bcmdhd modules are configured as part of the kernel.
if you do not like the output at startup, you can set the verbosity parameter to 1

[mara]

rebuilt the kernel with support for usb realtek and mediatek in the form of modules
download
http://dl.fail.pp.ua/slackware/pkg/aarch...-3mara.txz
http://dl.fail.pp.ua/slackware/pkg/aarch...-3mara.txz
http://dl.fail.pp.ua/slackware/pkg/aarch...-3mara.txz
http://dl.fail.pp.ua/slackware/pkg/aarch...-3mara.txz

Code:

upgradepkg kernel*.txz

dmesg

[mara]

update kernel 4.4.138

kernel-firmware-rk3328-4.4.138-aarch64-1mara.txz
kernel-headers-rk3328-4.4.138-aarch64-1mara.txz
kernel-modules-rk3328-4.4.138-aarch64-1mara.txz
kernel-rk3328-4.4.138-aarch64-1mara.txz

Code:

upgradepkg kernel*.txz

[mara]

update kernel 4.4.142

kernel-firmware-rk3328-4.4.142-aarch64-1mara.txz
kernel-headers-rk3328-4.4.142-aarch64-1mara.txz
kernel-modules-rk3328-4.4.142-aarch64-1mara.txz
kernel-rk3328-4.4.142-aarch64-1mara.txz