BSP Linux woes, early adopter information and a poll

[Luke]

Yes, I am pretty sure it senses the magnets in the lid (?). I am basing this assumption of this wikipedia article.

Thanks Luke and TL

Luke, could you add something to that effect where you mentioned in the OP? Didn't want to be rude and edit on you

And yes, a hall effect sensor is a solid state sensor for detecting magnetic fields, as opposed to a reed switch or other sensor. That's why I was wondering if it was for the lid or something else.

You are always welcome to edit my posts

[tllim]

Hello, in a few days I will go to some meetings and maybe a hackathon with the Pinebook 14 "and I am concerned about the failure of HDMI to do some presentation. Mini HDMI works on Android?

Thanks in advance, I expect a lot of Pinebook and Linux, and all the large community of developers of Pine64 / Linux

The Pinebook able to mirror image at HDMI output on both Ayufan (7.0 and 7.10 and vendor Android (6.0) build.

[Luke]

Hello, in a few days I will go to some meetings and maybe a hackathon with the Pinebook 14 "and I am concerned about the failure of HDMI to do some presentation. Mini HDMI works on Android?

Thanks in advance, I expect a lot of Pinebook and Linux, and all the large community of developers of Pine64 / Linux

The Pinebook able to mirror image at HDMI output on both Ayufan (7.0 and 7.10  and vendor Android (6.0) build.

Out of curiosity, does sleep/ wake work on android ?

[bcupps]

Has anyone had boot issues? I plug power in & the power LED just slowly flashes. Power button does nothing. After several minutes, the case around the power port gets VERY hot, like almost too hot to touch. I'm assuming there's a short somewhere in there. Unplug power and it cools down but no power LED flashing or anything. I opened a ticket yesterday but haven't gotten a response yet.

Thoughts?

[pgmy64]

Has anyone had boot issues? I plug power in & the power LED just slowly flashes. Power button does nothing. After several minutes, the case around the power port gets VERY hot, like almost too hot to touch. I'm assuming there's a short somewhere in there. Unplug power and it cools down but no power LED flashing or anything. I opened a ticket yesterday but haven't gotten a response yet.

Thoughts?

Can you try open up Pinebook casing and reconnect the eMMC and Battery connector as shown below?

http://imgur.com/a/ZpCER

[LordSuricato]

Hello, in a few days I will go to some meetings and maybe a hackathon with the Pinebook 14 "and I am concerned about the failure of HDMI to do some presentation. Mini HDMI works on Android?

Thanks in advance, I expect a lot of Pinebook and Linux, and all the large community of developers of Pine64 / Linux

The Pinebook able to mirror image at HDMI output on both Ayufan (7.0 and 7.10  and vendor Android (6.0) build.

That's great! Thank you very much. According to DHL it arrives just in time for the Hackathon.

[pgmy64]

Hello, in a few days I will go to some meetings and maybe a hackathon with the Pinebook 14 "and I am concerned about the failure of HDMI to do some presentation. Mini HDMI works on Android?

Thanks in advance, I expect a lot of Pinebook and Linux, and all the large community of developers of Pine64 / Linux

The Pinebook able to mirror image at HDMI output on both Ayufan (7.0 and 7.10  and vendor Android (6.0) build.

That's great! Thank you very much. According to DHL it arrives just in time for the Hackathon.

You can download the PINE64 Installer from

https://www.pine64.org/?page_id=5734

to install the OS into Pinebook eMMC.

[Luke]

Hello, in a few days I will go to some meetings and maybe a hackathon with the Pinebook 14 "and I am concerned about the failure of HDMI to do some presentation. Mini HDMI works on Android?

Thanks in advance, I expect a lot of Pinebook and Linux, and all the large community of developers of Pine64 / Linux

The Pinebook able to mirror image at HDMI output on both Ayufan (7.0 and 7.10  and vendor Android (6.0) build.

That's great! Thank you very much. According to DHL it arrives just in time for the Hackathon.

You can download the PINE64 Installer from

https://www.pine64.org/?page_id=5734

to install the OS into Pinebook eMMC.

Great, 
Will make a post about it in each relevant section section.

[bcupps]

Has anyone had boot issues? I plug power in & the power LED just slowly flashes. Power button does nothing. After several minutes, the case around the power port gets VERY hot, like almost too hot to touch. I'm assuming there's a short somewhere in there. Unplug power and it cools down but no power LED flashing or anything. I opened a ticket yesterday but haven't gotten a response yet.

Thoughts?

Can you try open up Pinebook casing and reconnect the eMMC and Battery connector as shown below?

http://imgur.com/a/ZpCER

After speaking with tllim on IRC today, I got home and did as you both suggested. No dice. I've sent tllim an email with photos and a short video showing what's going on. Thoughts?

[hxwong]

Hi all,
In current build, i forget to remove a command line in /etc/rc.local which cause the Bluetooth unstable. Thus, just delete "/usr/local/sbin/start_bt.sh /dev/ttyS1" in "/etc/rc.local" to solve it. And I will patch it into new build. Sorry for any inconvenient.