slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64)

dieselnutjob · (This post was last modified: 12-07-2021, 10:54 AM by dieselnutjob.)

I connected to a big Sony TV.
No output.
Unplugged the HDMI cable and plugged it back in.
I have HDMI !
Booting up before unplugging and replugging:-

Code:
root@quartz64:/var/log# cat Xorg.0.log                                                               

[    43.959]                                                                                         

X.Org X Server 1.20.13                                                                               

X Protocol Version 11, Revision 0                                                                    

[    43.959] Build Operating System: Slackware 15.0 Slackware Linux Project                          

[    43.959] Current Operating System: Linux quartz64 5.16.0-rc4 #1 SMP PREEMPT Sun Dec 5 23:15:25 U4

[    43.959] Kernel command line: root=/dev/mmcblk0p2 ro rootwait rootfstype=ext4 init=/sbin/init lo8

[    43.959] Build Date: 30 July 2021  08:16:48PM                                                    

[    43.959]                                                                                         

[    43.959] Current version of pixman: 0.40.0                                                       

[    43.959]    Before reporting problems, check http://wiki.x.org                                   

        to make sure that you have the latest version.                                               

[    43.959] Markers: (--) probed, (**) from config file, (==) default setting,                      

        (++) from command line, (!!) notice, (II) informational,                                     

        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.                                

[    43.960] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  7 12:35:18 2021                    

[    43.964] (==) Using config directory: "/etc/X11/xorg.conf.d"                                     

[    43.964] (==) Using system config directory "/usr/share/X11/xorg.conf.d"                         

[    43.972] (==) No Layout section.  Using the first Screen section.                                

[    43.972] (==) No screen section available. Using defaults.                                       

[    43.972] (**) |-->Screen "Default Screen Section" (0)                                            

[    43.972] (**) |   |-->Monitor "<default monitor>"                                                

[    43.974] (==) No monitor specified for screen "Default Screen Section".                          

        Using a default monitor configuration.                                                       

[    43.974] (**) Option "BlankTime" "0"                                                             

[    43.974] (**) Option "StandbyTime" "0"                                                           

[    43.974] (**) Option "SuspendTime" "0"                                                           

[    43.974] (**) Option "OffTime" "0"                                                               

[    43.974] (==) Automatically adding devices                                                       

[    43.974] (==) Automatically enabling devices                                                     

[    43.974] (==) Automatically adding GPU devices                                                   

[    43.974] (==) Automatically binding GPU devices                                                  

[    43.975] (==) Max clients allowed: 256, resource mask: 0x1fffff                                  

[    43.975] (WW) The directory "/usr/share/fonts/local" does not exist.                             

[    43.975]    Entry deleted from font path.                                                        

[    43.975] (WW) The directory "/usr/share/fonts/CID" does not exist.                               

[    43.975]    Entry deleted from font path.                                                        

[    43.986] (==) FontPath set to:                                                                   

        /usr/share/fonts/misc,                                                                       

        /usr/share/fonts/TTF,                                                                        

        /usr/share/fonts/OTF,                                                                        

        /usr/share/fonts/Type1,                                                                      

        /usr/share/fonts/75dpi/:unscaled,                                                            

        /usr/share/fonts/100dpi/:unscaled,                                                           

        /usr/share/fonts/75dpi,                                                                      

        /usr/share/fonts/100dpi,                                                                     

        /usr/share/fonts/cyrillic                                                                    

[    43.986] (==) ModulePath set to "/usr/lib64/xorg/modules"                                        

[    43.986] (II) The server relies on udev to provide the list of input devices.                    

        If no devices become available, reconfigure udev or disable AutoAddDevices.                  

[    43.986] (II) Loader magic: 0x624c30                                                             

[    43.986] (II) Module ABI versions:                                                               

[    43.986]    X.Org ANSI C Emulation: 0.4                                                          

[    43.986]    X.Org Video Driver: 24.1                                                             

[    43.986]    X.Org XInput driver : 24.1                                                           

[    43.986]    X.Org Server Extension : 10.0                                                        

[    43.987] (II) xfree86: Adding drm device (/dev/dri/card0)                                        

[    43.989] (II) no primary bus or device found                                                     

[    43.989]    falling back to /sys/devices/platform/display-subsystem/drm/card0                    

[    43.989] (II) LoadModule: "glx"                                                                  

[    43.994] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so                               

[    44.005] (II) Module glx: vendor="X.Org Foundation"                                              

[    44.005]    compiled for 1.20.13, module version = 1.0.0                                         

[    44.005]    ABI class: X.Org Server Extension, version 10.0                                      

[    44.005] (==) Matched modesetting as autoconfigured driver 0                                     

[    44.005] (==) Matched fbdev as autoconfigured driver 1                                           

[    44.005] (==) Assigned the driver to the xf86ConfigLayout                                        

[    44.005] (II) LoadModule: "modesetting"                                                          

[    44.007] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so                         

[    44.015] (II) Module modesetting: vendor="X.Org Foundation"                                      

[    44.015]    compiled for 1.20.13, module version = 1.20.13                                       

[    44.015]    Module class: X.Org Video Driver                                                     

[    44.016]    ABI class: X.Org Video Driver, version 24.1                                          

[    44.016] (II) LoadModule: "fbdev"                                                                

[    44.016] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so                               

[    44.019] (II) Module fbdev: vendor="X.Org Foundation"                                            

[    44.019]    compiled for 1.20.9, module version = 0.5.0                                          

[    44.019]    Module class: X.Org Video Driver                                                     

[    44.019]    ABI class: X.Org Video Driver, version 24.1                                          

[    44.019] (II) modesetting: Driver for Modesetting Kernel Drivers: kms                            

[    44.019] (II) FBDEV: driver for framebuffer: fbdev                                               

[    44.019] (++) using VT number 7                                                                  

[    44.024] (II) modeset(0): using drv /dev/dri/card0                                               

[    44.024] (WW) Falling back to old probe method for fbdev                                         

[    44.024] (II) Loading sub module "fbdevhw"                                                       

[    44.024] (II) LoadModule: "fbdevhw"                                                              

[    44.027] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so                                      

[    44.028] (II) Module fbdevhw: vendor="X.Org Foundation"                                          

[    44.029]    compiled for 1.20.13, module version = 0.0.2                                         

[    44.029]    ABI class: X.Org Video Driver, version 24.1                                          

[    44.029] (EE) open /dev/fb0: No such file or directory                                           

[    44.029] (II) modeset(0): Creating default Display subsection in Screen section                  

        "Default Screen Section" for depth/fbbpp 24/32                                               

[    44.030] (==) modeset(0): Depth 24, (==) framebuffer bpp 32                                      

[    44.030] (==) modeset(0): RGB weight 888                                                         

[    44.030] (==) modeset(0): Default visual is TrueColor                                            

[    44.030] (II) Loading sub module "glamoregl"                                                     

[    44.030] (II) LoadModule: "glamoregl"                                                            

[    44.031] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so                                    

[    44.076] (II) Module glamoregl: vendor="X.Org Foundation"                                        

[    44.076]    compiled for 1.20.13, module version = 1.0.1                                         

[    44.076]    ABI class: X.Org ANSI C Emulation, version 0.4                                       

[    46.636] (II) modeset(0): Refusing to try glamor on llvmpipe                                     

[    46.643] (EE) modeset(0): glamor initialization failed                                           

[    46.643] (II) modeset(0): ShadowFB: preferred NO, enabled NO                                     

[    46.643] (II) modeset(0): Output HDMI-1 has no monitor section                                   

[    46.644] (II) modeset(0): EDID for output HDMI-1                                                 

[    46.644] (II) modeset(0): Output HDMI-1 disconnected                                             

[    46.644] (WW) modeset(0): No outputs definitely connected, trying again...                       

[    46.644] (II) modeset(0): Output HDMI-1 disconnected                                             

[    46.644] (WW) modeset(0): Unable to find connected outputs - setting 1024x768 initial framebuffer

[    46.644] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)                                 

[    46.644] (==) modeset(0): DPI set to (96, 96)                                                    

[    46.644] (II) Loading sub module "fb"                                                            

[    46.644] (II) LoadModule: "fb"                                                                   

[    46.645] (II) Loading /usr/lib64/xorg/modules/libfb.so                                           

[    46.651] (II) Module fb: vendor="X.Org Foundation"                                               

[    46.651]    compiled for 1.20.13, module version = 1.0.0                                         

[    46.651]    ABI class: X.Org ANSI C Emulation, version 0.4                                       

[    46.652] (II) UnloadModule: "fbdev"                                                              

[    46.652] (II) Unloading fbdev                                                                    

[    46.652] (II) UnloadSubModule: "fbdevhw"                                                         

[    46.652] (II) Unloading fbdevhw                                                                  

[    46.664] (==) modeset(0): Backing store enabled                                                  

[    46.664] (==) modeset(0): Silken mouse enabled                                                   

[    46.668] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.                        

[    46.669] (==) modeset(0): DPMS enabled                                                           

[    46.669] (II) Initializing extension Generic Event Extension                                     

[    46.669] (II) Initializing extension SHAPE                                                       

[    46.669] (II) Initializing extension MIT-SHM                                                     

[    46.669] (II) Initializing extension XInputExtension                                             

[    46.670] (II) Initializing extension XTEST                                                       

[    46.671] (II) Initializing extension BIG-REQUESTS                                                

[    46.671] (II) Initializing extension SYNC                                                        

[    46.671] (II) Initializing extension XKEYBOARD                                                   

[    46.671] (II) Initializing extension XC-MISC                                                     

[    46.671] (II) Initializing extension XFIXES                                                      

[    46.671] (II) Initializing extension RENDER                                                      

[    46.671] (II) Initializing extension RANDR                                                       

[    46.671] (II) Initializing extension COMPOSITE                                                   

[    46.671] (II) Initializing extension DAMAGE                                                      

[    46.671] (II) Initializing extension MIT-SCREEN-SAVER                                            

[    46.671] (II) Initializing extension DOUBLE-BUFFER                                               

[    46.671] (II) Initializing extension RECORD                                                      

[    46.671] (II) Initializing extension DPMS                                                        

[    46.671] (II) Initializing extension Present                                                     

[    46.672] (II) Initializing extension DRI3                                                        

[    46.672] (II) Initializing extension X-Resource                                                  

[    46.672] (II) Initializing extension XVideo                                                      

[    46.672] (II) Initializing extension XVideo-MotionCompensation                                   

[    46.672] (II) Initializing extension GLX                                                         

[    46.672] (II) AIGLX: Screen 0 is not DRI2 capable                                                

[    46.832] (II) IGLX: Loaded and initialized swrast                                                

[    46.832] (II) GLX: Initialized DRISWRAST GL provider for screen 0                                

[    46.832] (II) Initializing extension XFree86-VidModeExtension                                    

[    46.832] (II) Initializing extension XFree86-DGA                                                 

[    46.832] (II) Initializing extension XFree86-DRI                                                 

[    46.833] (II) Initializing extension DRI2                                                        

[    46.835] (II) modeset(0): Damage tracking initialized                                            

[    47.584] (II) config/udev: Adding input device Logitech K400 Plus (/dev/input/event1)            

[    47.584] (**) Logitech K400 Plus: Applying InputClass "evdev pointer catchall"                   

[    47.584] (**) Logitech K400 Plus: Applying InputClass "evdev keyboard catchall"                  

[    47.584] (**) Logitech K400 Plus: Applying InputClass "libinput pointer catchall"                

[    47.584] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"               

[    47.584] (**) Logitech K400 Plus: Applying InputClass "keyboard-all"                             

[    47.584] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"               

[    47.584] (II) LoadModule: "libinput"                                                             

[    47.585] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so                              

[    47.609] (II) Module libinput: vendor="X.Org Foundation"                                         

[    47.609]    compiled for 1.20.13, module version = 1.2.0                                         

[    47.609]    Module class: X.Org XInput Driver                                                    

[    47.609]    ABI class: X.Org XInput driver, version 24.1                                         

[    47.609] (II) Using input driver 'libinput' for 'Logitech K400 Plus'                             

[    47.609] (**) Logitech K400 Plus: always reports core events                                     

[    47.609] (**) Option "Device" "/dev/input/event1"                                                

[    47.611] (**) Option "_source" "server/udev"                                                     

[    47.646] (II) event1  - Logitech K400 Plus: is tagged by udev as: Keyboard Mouse                 

[    47.646] (II) event1  - Logitech K400 Plus: device is a pointer                                  

[    47.646] (II) event1  - Logitech K400 Plus: device is a keyboard                                 

[    47.647] (II) event1  - Logitech K400 Plus: device removed                                       

[    47.681] (II) libinput: Logitech K400 Plus: needs a virtual subdevice                            

[    47.681] (**) Option "config_info" "udev:/sys/devices/platform/fd840000.usb/usb3/3-1/3-1:1.2/000"

[    47.681] (II) XINPUT: Adding extended input device "Logitech K400 Plus" (type: MOUSE, id 6)      

[    47.682] (**) Option "AccelerationScheme" "none"                                                 

[    47.683] (**) Logitech K400 Plus: (accel) selected scheme none/0                                 

[    47.683] (**) Logitech K400 Plus: (accel) acceleration factor: 2.000                             

[    47.683] (**) Logitech K400 Plus: (accel) acceleration threshold: 4                              

[    47.687] (II) event1  - Logitech K400 Plus: is tagged by udev as: Keyboard Mouse                 

[    47.687] (II) event1  - Logitech K400 Plus: device is a pointer                                  

[    47.687] (II) event1  - Logitech K400 Plus: device is a keyboard                                 

[    47.690] (II) config/udev: Adding input device Logitech K400 Plus (/dev/input/mouse0)            

[    47.690] (II) No input driver specified, ignoring this device.                                   

[    47.690] (II) This device may have been added with another device file.                          

[    47.692] (II) config/udev: Adding input device Analog RK817 Headphones (/dev/input/event0)       

[    47.693] (II) No input driver specified, ignoring this device.                                   

[    47.693] (II) This device may have been added with another device file.                          

[    47.722] (**) Logitech K400 Plus: Applying InputClass "evdev pointer catchall"                   

[    47.723] (**) Logitech K400 Plus: Applying InputClass "evdev keyboard catchall"                  

[    47.723] (**) Logitech K400 Plus: Applying InputClass "libinput pointer catchall"                

[    47.723] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"               

[    47.723] (**) Logitech K400 Plus: Applying InputClass "keyboard-all"                             

[    47.723] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"               

[    47.723] (II) Using input driver 'libinput' for 'Logitech K400 Plus'                             

[    47.723] (**) Logitech K400 Plus: always reports core events                                     

[    47.723] (**) Option "Device" "/dev/input/event1"                                                

[    47.723] (**) Option "_source" "_driver/libinput"                                                

[    47.723] (II) libinput: Logitech K400 Plus: is a virtual subdevice                               

[    47.724] (**) Option "config_info" "udev:/sys/devices/platform/fd840000.usb/usb3/3-1/3-1:1.2/000"

[    47.724] (II) XINPUT: Adding extended input device "Logitech K400 Plus" (type: KEYBOARD, id 7)   

[    47.724] (**) Option "xkb_layout" "us"                                                           

[    47.724] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"

after unplugging and replugging the HDMI cable:-

Code:
[   130.246] (II) modeset(0): EDID vendor "SNY", prod id 50179                                       

[   130.247] (II) modeset(0): Using EDID range info for horizontal sync                              

[   130.247] (II) modeset(0): Using EDID range info for vertical refresh                             

[   130.247] (II) modeset(0): Printing DDC gathered Modelines:                                       

[   130.247] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 )

[   130.247] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 )

[   130.248] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094)

[   130.248] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 )

[   130.248] (II) modeset(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094)

[   130.248] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 )

[   130.248] (II) modeset(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 )

[   130.248] (II) modeset(0): Modeline "1920x1080"x0.0   74.25  1920 2008 2052 2200  1080 1084 1089 )

[   130.248] (II) modeset(0): Modeline "1280x720"x0.0   59.40  1280 3040 3080 3300  720 725 730 750 )

[   130.248] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 3040 3080 3300  720 725 730 750 )

[   130.248] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsyn)

[   130.248] (II) modeset(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625)

[   130.248] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsyn)

[   130.248] (II) modeset(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525)

[   130.248] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsyn)

[   130.248] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsy)

[   130.248] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 )

[   130.248] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 )

[   130.249] (II) modeset(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932)

[   130.249] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 )

[   130.249] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 )

[   130.249] (--) modeset(0): HDMI max TMDS frequency 300000KHz

once the screen starts working it seems to continue working after a reboot
I even get some terminal stuff on the screen before X windows starts up.
In fact even if I do a halt, disconnect the power and then do a cold boot, the screen works.

I'm not getting a DHCP IP address from the eth0 though

mara · 12-07-2021, 03:31 PM

(12-07-2021, 10:28 AM)dieselnutjob Wrote: I'm not getting a DHCP IP address from the eth0 though

I confirm until the reason is incomprehensible.

mara · (This post was last modified: 01-24-2022, 09:56 PM by mara.)

update kernel 4.19.220
slarm64-current-aarch64-server-quartz64-4.19.220-build-20211208.img.zst
slarm64-current-aarch64-server-quartz64-4.19.220-build-20211208.img.zst.sha256
slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst
slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst.sha256

dieselnutjob · 12-12-2021, 02:56 PM

mara, if I compile my own Kernel and want to drop it into your SLARM64 image, how would I create a new uInitrd file please?

mara · 12-12-2021, 03:05 PM

(12-12-2021, 02:56 PM)dieselnutjob Wrote: mara, if I compile my own Kernel and want to drop it into your SLARM64 image, how would I create a new uInitrd file please?

for this there is /boot/rebuild-initrd.sh, boot with the new kernel and run the script.
or use the function from the assembly script.

**tllim** · 01-24-2022, 04:17 PM

(12-09-2021, 05:27 AM)mara Wrote: update kernel 4.19.220
slarm64-current-aarch64-server-quartz64-4.19.220-build-20211208.img.zst
slarm64-current-aarch64-server-quartz64-4.19.220-build-20211208.img.zst.sha256
slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst
slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst.sha256

The above XFCE has broken link, here is the working link: http://dl.slarm64.org/slackware/images/q...08.img.zst

dieselnutjob · 01-28-2022, 05:21 PM

Hi Mara
If I compile and boot a kernel that I compiled myself, how do I populate /lib/modules/{version}?
currently I only have /lib/modules/{oldversion}
I can see all of the .ko files listed when the modules were compiled, but then there are all the other files like aliases

I am assuming that there is some normal way to do it that I don't know.

Until I have a /lib/modules I can't run rebuild-initrd.sh

mara · 01-28-2022, 05:27 PM

(01-28-2022, 05:21 PM)dieselnutjob Wrote: Hi Mara
If I compile and boot a kernel that I compiled myself, how do I populate /lib/modules/{version}?
currently I only have /lib/modules/{oldversion}
I can see all of the .ko files listed when the modules were compiled, but then there are all the other files like aliases

I am assuming that there is some normal way to do it that I don't know.

Until I have a /lib/modules I can't run rebuild-initrd.sh

after compiling you did:

Code:
make O=$(pwd) ARCH=arm64 INSTALL_MOD_PATH=/lib/modules modules_install

dieselnutjob · 01-28-2022, 06:04 PM

(01-28-2022, 05:27 PM)mara Wrote:
(01-28-2022, 05:21 PM)dieselnutjob Wrote: Hi Mara
If I compile and boot a kernel that I compiled myself, how do I populate /lib/modules/{version}?
currently I only have /lib/modules/{oldversion}
I can see all of the .ko files listed when the modules were compiled, but then there are all the other files like aliases

I am assuming that there is some normal way to do it that I don't know.

Until I have a /lib/modules I can't run rebuild-initrd.sh

after compiling you did:

Code:
make O=$(pwd) ARCH=arm64 INSTALL_MOD_PATH=/lib/modules modules_install

I am cross compiling on a normal PC. Does that make a difference?

mara · 01-28-2022, 06:09 PM

(01-28-2022, 06:04 PM)dieselnutjob Wrote:
(01-28-2022, 05:27 PM)mara Wrote:
(01-28-2022, 05:21 PM)dieselnutjob Wrote: Hi Mara
If I compile and boot a kernel that I compiled myself, how do I populate /lib/modules/{version}?
currently I only have /lib/modules/{oldversion}
I can see all of the .ko files listed when the modules were compiled, but then there are all the other files like aliases

I am assuming that there is some normal way to do it that I don't know.

Until I have a /lib/modules I can't run rebuild-initrd.sh

after compiling you did:

Code:
make O=$(pwd) ARCH=arm64 INSTALL_MOD_PATH=/lib/modules modules_install

I am cross compiling on a normal PC. Does that make a difference?

no, specify where to install the modules and then transfer to the sdcard

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	irradium (based on crux linux) Quartz64 riscv64, aarch64	mara	4	1,404	11-20-2024, 10:45 AM Last Post: mara
	USB on Quartz64 Zero	litbulb	0	145	11-13-2024, 08:16 AM Last Post: litbulb
	Armbian and LibreELEC and AltLinux for Quartz64	balbes150	149	87,389	10-25-2024, 01:53 PM Last Post: gounthar
	DietPi OS for Quartz64	MichaIng	47	22,234	08-08-2024, 07:42 AM Last Post: ifreislich
	quartz64-a - on-board SATA port problems	manning	2	1,890	09-14-2023, 04:22 PM Last Post: manning
	How the reset Quartz64-b onboard memory (emmc)	beepy	2	1,498	07-20-2023, 10:44 PM Last Post: beepy
	crux-arm Quartz64 RK3566 (aarch64)	mara	5	6,105	10-29-2022, 06:55 AM Last Post: mara
	Ov5647 camera attached via csi to Quartz64 /Soquartz	Randomuser	0	1,564	07-21-2022, 01:08 PM Last Post: Randomuser
	Armbian on Quartz64	dieselnutjob	34	33,403	03-17-2022, 06:29 AM Last Post: balbes150

Login




Remember me Lost Password?

About Us