DeviceNotReady After flashing modem firmware
02-13-2024, 11:36 PM
Just wanted to touch base back here for future readers.
The modem got stuck in Factory Test Mode after a failed flash which made getting into fastboot mode fail with most methods. After this I was able to recover the modem and then flash to the latest 0.7.4 release.
If you have one of these newer pinephone pros then be wary when flashing. Only do it manually following the documentation on the github. Always make sure you're in fastboot with lsusb before flashing any file.
If you run into issues, join the matrix room and you'll get sorted out
The modem got stuck in Factory Test Mode after a failed flash which made getting into fastboot mode fail with most methods. After this I was able to recover the modem and then flash to the latest 0.7.4 release.
If you have one of these newer pinephone pros then be wary when flashing. Only do it manually following the documentation on the github. Always make sure you're in fastboot with lsusb before flashing any file.
If you run into issues, join the matrix room and you'll get sorted out