SOLVED: New PineTab2 not booting properly. SECONDARY PROBLEM SOLVED: Not updating
#1
SOLVED: short solution - it was the connection to the screen and a problem with the board that connection is on. It needed pressure in a specific spot to display, taped a piece of eraser there.



Hi, I just received my pinetab2 today but when I turned it on the screen turns on, but it's just black.
I have tried to flash another image onto it, but that doesn't seem to work for me as it still wont display
on the built in screen.

If I load minicom, I can access the system and login from the terminal, and I can navigate the file system, so
it is actually there, it just wont display on the actual tablet so i can use it for whatever reason.

I tried looking around the forum, and it seems like a lot of other people have (maybe?) similar problems.
I'm sorry for the wall of text but I saw others put their minicom output here, so thats what i'll do too.
I would really appreciate it if someone could help.

Here's the boot., and dmesg is below.

Code:
Welcome to minicom 2.8

OPTIONS: I18n
Port /dev/ttyUSB0, 23:19:15

Press CTRL-A Z for help on special keys

DDR Version V1.13 20220218
ln
ddrconfig:7
LPDDR4X, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=16 Size=8192MB
tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -72ps, dqs3: -217ps,
tdqss: cs1 dqs0: -24ps, dqs1: -96ps, dqs2: -72ps, dqs3: -192ps,

change to: 324MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:24%, vrefout:41%
dram drv:40,odt:0
clk skew:0x64

change to: 528MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:24%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 780MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:24%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 1056MHz(final freq)
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:22%
dram drv:40,odt:80
vref_ca:00000071
clk skew:0x43
cs 0:
the read training result:
DQS0:0x3b, DQS1:0x3d, DQS2:0x3f, DQS3:0x35,
min  : 0xd  0xd  0xf  0xd  0x2  0x5  0x9  0x5 , 0x9  0x9  0x3  0x2  0xd  0xb  0xe  0xc ,
      0xf 0x10  0xc  0xa  0x5  0x1  0x3  0x6 , 0xa  0x7  0x6  0x2  0xe  0xd  0xa  0xd ,
mid  :0x2a 0x2b 0x2d 0x2b 0x20 0x23 0x27 0x23 ,0x27 0x28 0x22 0x21 0x2b 0x2a 0x2c 0x29 ,
      0x2e 0x2f 0x2b 0x29 0x25 0x21 0x22 0x25 ,0x29 0x26 0x25 0x21 0x2d 0x2c 0x28 0x2c ,
max  :0x48 0x4a 0x4c 0x49 0x3f 0x41 0x45 0x41 ,0x45 0x47 0x41 0x40 0x4a 0x49 0x4b 0x47 ,
      0x4e 0x4f 0x4a 0x49 0x46 0x41 0x42 0x45 ,0x48 0x45 0x44 0x40 0x4c 0x4c 0x47 0x4c ,
range:0x3b 0x3d 0x3d 0x3c 0x3d 0x3c 0x3c 0x3c ,0x3c 0x3e 0x3e 0x3e 0x3d 0x3e 0x3d 0x3b ,
      0x3f 0x3f 0x3e 0x3f 0x41 0x40 0x3f 0x3f ,0x3e 0x3e 0x3e 0x3e 0x3e 0x3f 0x3d 0x3f ,
the write training result:
DQS0:0x40, DQS1:0x37, DQS2:0x3a, DQS3:0x26,
min  :0x66 0x68 0x6a 0x67 0x5c 0x60 0x64 0x62 0x62 ,0x58 0x58 0x55 0x53 0x5d 0x5b 0x5d 0x5b 0x58 ,
      0x63 0x63 0x60 0x5f 0x5a 0x57 0x58 0x5e 0x5e ,0x52 0x50 0x50 0x4d 0x56 0x56 0x52 0x58 0x50 ,
mid  :0x81 0x83 0x85 0x81 0x77 0x7a 0x7e 0x7c 0x7c ,0x74 0x73 0x6f 0x6f 0x79 0x76 0x77 0x76 0x74 ,
      0x7f 0x7f 0x7b 0x7b 0x76 0x72 0x73 0x79 0x7a ,0x6e 0x6b 0x6c 0x69 0x72 0x72 0x6e 0x73 0x6c ,
max  :0x9c 0x9e 0xa0 0x9c 0x93 0x95 0x99 0x96 0x96 ,0x91 0x8f 0x8a 0x8b 0x95 0x92 0x92 0x91 0x90 ,
      0x9c 0x9c 0x97 0x97 0x92 0x8d 0x8f 0x94 x0x96 ,0x8b 0x87 0x88 0x85 0x8f 0x8f 0x8a 0x8f 0x89 ,
range:0x3:6 0x36 0x36 0x35 0x37 0x35 0x35 0x34 0x34 ,0x39 0x37 0x35 0x38 0x38 0x37 0x35 0x36 0x38 ,
      0x39 0x39 0x37 0x38 0x38 0x36 0x37 0x36 0x38 ,0x39 0x37 0x38 0x38 0x39 0x39 0x38 0x37 0x39 ,
cs 1:
the read training result:
DQS0:0x39, DQS1:0x3d, DQS2:0x3f, DQS3:0x35,
min  : 0xc  0xc  0xf  0xc  0x1  0x4  0x8  0x4 , 0x9  0x9  0x4  0x1  0xd  0xc  0xe  0xc ,
      0x10  0xf  0xa  0x9  0x6  0x1  0x4  0x7 , 0xa  0x6  0x6  0x2  0xe  0xd  0xa  0xe ,
mid  :0x29 0x2a 0x2c 0x29 0x1f 0x22 0x25 0x21 ,0x27 0x28 0x22 0x20 0x2b 0x2a 0x2b 0x29 ,
      0x2f 0x2f 0x2a 0x29 0x26 0x20 0x23 0x26 ,0x29 0x25 0x25 0x21 0x2d 0x2c 0x28 0x2d ,
max  :0x47 0x48 0x4a 0x47 0x3e 0x40 0x43 0x3f ,0x45 0x47 0x41 0x3f 0x49 0x48 0x49 0x47 ,
      0x4e 0x4f 0x4a 0x49 0x46 0x40 0x43 0x46 ,0x48 0x45 0x44 0x40 0x4c 0x4c 0x47 0x4c ,
range:0x3b 0x3c 0x3b 0x3b 0x3d 0x3c 0x3b 0x3b ,0x3c 0x3e 0x3d 0x3e 0x3c 0x3c 0x3b 0x3b ,
      0x3e 0x40 0x40 0x40 0x40 0x3f 0x3f 0x3f ,0x3e 0x3f 0x3e 0x3e 0x3e 0x3f 0x3d 0x3e ,
the write training result:
DQS0:0x40, DQS1:0x37, DQS2:0x3a, DQS3:0x26,
min  :0x67 0x6a 0x6b 0x69 0x5e 0x62 0x66 0x64 0x65 ,0x5a 0x5a 0x55 0x55 0x5e 0x5c 0x5e 0x5c 0x5a ,
      0x65 0x65 0x60 0x60 0x5b 0x58 0x59 0x5e 0x5e ,0x55 0x54 0x53 0x51 0x59 0x59 0x56 0x5b 0x55 ,
mid  :0x82 0x85 0x86 0x84 0x79 0x7c 0x80 0x7d 0x7e ,0x76 0x75 0x70 0x70 0x79 0x77 0x78 0x77 0x75 ,
      0x81 0x81 0x7c 0x7c 0x77 0x73 0x74 0x79 0x7a ,0x72 0x70 0x6f 0x6d 0x76 0x76 0x72 0x77 0x71 ,
max  :0x9e 0xa0 0xa2 0x9f 0x94 0x96 0x9a 0x97 0x98 ,0x92 0x91 0x8c 0x8b 0x95 0x93 0x93 0x92 0x91 ,
      0x9d 0x9e 0x98 0x98 0x94 0x8e 0x90 0x94 0x97 ,0x8f 0x8c 0x8b 0x8a 0x93 0x93 0x8f 0x94 0x8d ,
range:0x37 0x36 0x37 0x36 0x36 0x34 0x34 0x33 0x33 ,0x38 0x37 0x37 0x36 0x37 0x37 0x35 0x36 0x37 ,
      0x38 0x39 0x38 0x38 0x39 0x36 0x37 0x36 0x39 ,0x3a 0x38 0x38 0x39 0x3a 0x3a 0x39 0x39 0x38 ,
CA Training result:
cs:0 min  :0x46 0x3b 0x3b 0x2c 0x3b 0x2d 0x3b ,0x44 0x36 0x38 0x2b 0x3b 0x2b 0x3c ,
cs:0 mid  :0x7e 0x7f 0x74 0x72 0x74 0x72 0x68 ,0x7c 0x7b 0x70 0x70 0x73 0x70 0x6a ,
cs:0 max  :0xb6 0xc4 0xae 0xb8 0xae 0xb8 0x96 ,0xb5 0xc1 0xa9 0xb5 0xab 0xb6 0x98 ,
cs:0 range:0x70 0x89 0x73 0x8c 0x73 0x8b 0x5b ,0x71 0x8b 0x71 0x8a 0x70 0x8b 0x5c ,
cs:1 min  :0x3f 0x3b 0x36 0x2f 0x36 0x2f 0x36 ,0x40 0x39 0x33 0x2e 0x35 0x2f 0x36 ,
cs:1 mid  :0x7b 0x7c 0x73 0x71 0x72 0x72 0x66 ,0x7c 0x7b 0x70 0x6f 0x71 0x70 0x67 ,
cs:1 max  :0xb8 0xbe 0xb0 0xb4 0xaf 0xb5 0x96 ,0xb8 0xbe 0xad 0xb0 0xae 0xb2 0x99 ,
cs:1 range:0x79 0x83 0x7a 0x85 0x79 0x86 0x60 ,0x78 0x85 0x7a 0x82 0x79 0x83 0x63 ,
out
U-Boot SPL board init
U-Boot SPL 2017.09-2-g216faafc18-220629 #builduser (May 25 2023 - 11:00:15)
set_freq=96000000Hz fail, check if it's the cru support level
Cannot set speed (err=-2)
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
Card did not respond to voltage select!
mmc_init: -95, time 10
spl: mmc init failed with error: -95
Trying to boot from MMC1
No misc partition
spl: partition error
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(6204b6f381...) + OK
## Checking uboot 0x00a00000 ... sha256(c11ad22269...) + OK
## Checking fdt 0x00b206b0 ... sha256(dd16d48c74...) + OK
## Checking atf-2 0xfdcc1000 ... sha256(5563d929da...) + OK
## Checking atf-3 0x0006a000 ... sha256(b04372ab0f...) + OK
## Checking atf-4 0xfdcd0000 ... sha256(b46eaa95b8...) + OK
## Checking atf-5 0xfdcce000 ... sha256(2f8839c803...) + OK
## Checking atf-6 0x00068000 ... sha256(6e9d32ba23...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
Total: 169.868 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-365-gae7c295ca:derrick.huang
NOTICE:  BL31: Built : 15:37:13, May 17 2022
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    pmu v1 is valid 220114
INFO:    dfs DDR fsp_param[0].freq_mhz= 1056MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:  Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-2-g216faafc18-220629 #builduser (May 25 2023 - 11:00:15 +0000)

Model: Pine64 PineTab2 v2.0
PreSerial: 2, raw, 0xfe660000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: ed358000
Relocation fdt: eb9f9380 - eb9fecd0
CR: M/C/I
dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v1
No misc partition
boot mode: None
No resource partition
No resource partition
Failed to load DTB, ret=-19
No find valid DTB, ret=-22
Failed to get kernel dtb, ret=-22
io-domain: OK
Card did not respond to voltage select!
mmc_init: -95, time 10
** Bad device mmc 1 **
Using default environment

In:    serial
Out:  serial
Err:  serial
Model: Pine64 PineTab2 v2.0
rockchip_set_serialno: could not find efuse/otp device
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  apll 816000 KHz
  dpll 528000 KHz
  gpll 1188000 KHz
  cpll 1000000 KHz
  npll 24000 KHz
  vpll 24000 KHz
  hpll 24000 KHz
  ppll 200000 KHz
  armclk 816000 KHz
  aclk_bus 150000 KHz
  pclk_bus 50000 KHz
  aclk_top_high 300000 KHz
  aclk_top_low 200000 KHz
  hclk_top 150000 KHz
  pclk_top 50000 KHz
  aclk_perimid 300000 KHz
  hclk_perimid 150000 KHz
  pclk_pmu 100000 KHz
No misc partition
Net:  No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
Card did not respond to voltage select!
mmc_init: -95, time 10
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
940 bytes read in 0 ms
## Executing script at 00c00000
Booting from eMMC
Loading kernel...
reading /Image.gz
8482543 bytes read in 61 ms (132.6 MiB/s)
Uncompressing kernel...
Uncompressed size: 20484104 = 0x1389008
Loading initramfs...
reading /initramfs-linux.img
8104609 bytes read in 53 ms (145.8 MiB/s)
Loading dtb...
reading /dtbs/rockchip/rk3566-pinetab2-v2.0.dtb
119800 bytes read in 3 ms (38.1 MiB/s)
Booting...
Fdt Ramdisk skip relocation
No misc partition
## Flattened Device Tree blob at 0x0a100000
  Booting using the fdt blob at 0x0a100000
  Using Device Tree in place at 000000000a100000, end 000000000a1203f7
can't found rockchip,drm-logo, use rockchip,fb-logo
WARNING: could not set reg FDT_ERR_BADOFFSET.
failed to reserve fb-loader-logo memory
Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
== DO RELOCATE == Kernel from 0x00280000 to 0x00400000
Total: 860.891 ms

Starting kernel ...

[    0.000000] clk: failed to reparent gpll to clk_rtc32k_frac: -22
[    0.000000] clk: failed to reparent gpll to clk_rtc32k_frac: -22
[    0.699614] dw-mipi-dsi-rockchip fe060000.dsi: Failed to create device link (0x180) with vcc_3v3
:: running early hook [udev]
Starting systemd-udevd version 253.4-1-arch
:: running hook [udev]
:: Triggering uevents...
:: running hook [keymap]
:: Loading keymap...kbd_mode: KDSKBMODE: Inappropriate ioctl for device
Gdone.
:: performing fsck on '/dev/mmcblk1p2'
/dev/mmcblk1p2: recovering journal
/dev/mmcblk1p2: clean, 192834/7596960 files, 2032596/30496256 blocks
:: mounting '/dev/mmcblk1p2' on real root
:: running cleanup hook [udev]

Welcome to Arch Linux ARM!

[  OK  ] Created slice Slice /system/getty.
[  OK  ] Created slice Slice /system/modprobe.
[  OK  ] Created slice Slice /system/serial-getty.
[  OK  ] Created slice Slice /system/systemd-fsck.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[  OK  ] Reached target Local Integrity Protected Volumes.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target Slice Units.
[  OK  ] Reached target Swaps.
1;-1f[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Started Forward Password R…s to Plymouth Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Created slice Slice /system/udisks2-zram-setup.
        Starting Load Kernel Module dm_mod...
        Starting Load Kernel Module loop...
[  OK  ] Finished Load Kernel Module loop.
[  OK  ] Finished Load Kernel Module dm_mod.
[  OK  ] Found device /dev/ttyS2.
[  OK  ] Found device /dev/disk/by-uuid/0159-FDB0.
[  OK  ] Created slice Slice /system/systemd-backlight.
        Starting Load/Save Screen …ness of backlight:backlight...
[  OK  ] Reached target Hardware activated USB gadget.
[  OK  ] Finished Load/Save Screen …htness of backlight:backlight.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[    7.801266] ov5648 2-0036: failed to find 168000000 clk rate in endpoint link-frequencies
[  OK  ] Finished Load/Save OS Random Seed.
[  OK  ] Finished Monitoring of LVM… dmeventd or progress polling.
[  OK  ] Reached target Preparation for Local File Systems.
        Starting File System Check…/dev/disk/by-uuid/0159-FDB0...
[  OK  ] Finished File System Check…n /dev/disk/by-uuid/0159-FDB0.
        Mounting /boot...
[  OK  ] Mounted /boot.
[  OK  ] Reached target Local File Systems.
        Starting Tell Plymouth To Write Out Runtime Data...
        Starting Create Volatile Files and Directories...
[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.
[  OK  ] Finished Create Volatile Files and Directories.
        Starting Network Time Synchronization...
        Starting Record System Boot/Shutdown in UTMP...
[  OK  ] Reached target Sound Card.
[  OK  ] Finished Record System Boot/Shutdown in UTMP.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started CUPS Scheduler.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Path Units.
[  OK  ] Reached target System Time Set.
[  OK  ] Started Refresh existing P…f archlinux-keyring regularly.
[  OK  ] Started Daily verification of password and group files.
[  OK  ] Reached target Timer Units.
[  OK  ] Listening on CUPS Scheduler.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Socket Units.
[  OK  ] Reached target Basic System.
        Starting D-Bus System Message Bus...
        Starting User Login Management...
        Starting UDisks2 managed ZRAM device zram0 setup...
        Starting Zram-based swap (…mpressed RAM block devices)...
[  OK  ] Finished UDisks2 managed ZRAM device zram0 setup.
[  OK  ] Finished Zram-based swap (compressed RAM block devices).
[  OK  ] Started D-Bus System Message Bus.
        Starting Network Manager...
[  OK  ] Started User Login Management.
[  OK  ] Started Network Manager.
[  OK  ] Reached target Network.
        Starting CUPS Scheduler...
        Starting Permit User Sessions...
        Starting Hostname Service...
[  OK  ] Finished Permit User Sessions.
        Starting Hold until boot process finishes up...
        Starting Terminate Plymouth Boot Screen...



------------------------------------------------------------------------------------------------------------------------------
dmesg

Code:
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.3.0-2-danctnix (builduser@alarm) (aarch64-unknown-linux-gnu-gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_DYNAMIC Fri May 26 07:05:36 UTC 2023
[    0.000000] Machine model: Pine64 PineTab2 v2.0
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000001ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x1fefdafc0-0x1fefdcfff]
[    0.000000] Zone ranges:
[    0.000000]  DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]  DMA32    empty
[    0.000000]  Normal  [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]  node  0: [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000]  node  0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 256 MiB at 0x00000000e0000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 21 pages/cpu s48744 r8192 d29080 u86016
[    0.000000] pcpu-alloc: s48744 r8192 d29080 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1999368
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: loglevel=4 root=/dev/mmcblk1p2 rw rootwait
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e0000000] (64MB)
[    0.000000] Memory: 7611308K/8124416K available (12224K kernel code, 1316K rwdata, 4028K rodata, 2304K init, 442K bss, 250964K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Dynamic Preempt: full
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 320 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: MBI range [296:319]
[    0.000000] GICv3: Using MBI frame 0x00000000fd410000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clk: failed to reparent gpll to clk_rtc32k_frac: -22
[    0.000000] clk: failed to reparent gpll to clk_rtc32k_frac: -22
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001973] Console: colour dummy device 80x25
[    0.001993] printk: console [tty0] enabled
[    0.002186] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002208] pid_max: default: 32768 minimum: 301
[    0.002314] LSM: initializing lsm=capability,integrity,apparmor
[    0.002470] AppArmor: AppArmor initialized
[    0.002627] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.002687] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.005598] cblist_init_generic: Setting adjustable number of callback queues.
[    0.005623] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.005803] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.006162] rcu: Hierarchical SRCU implementation.
[    0.006173] rcu:    Max phase no-delay instances is 1000.
[    0.007690] smp: Bringing up secondary CPUs ...
[    0.008699] Detected VIPT I-cache on CPU1
[    0.008784] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[    0.008844] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.009949] Detected VIPT I-cache on CPU2
[    0.010021] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[    0.010064] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.011142] Detected VIPT I-cache on CPU3
[    0.011208] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[    0.011247] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.011386] smp: Brought up 1 node, 4 CPUs
[    0.011410] SMP: Total of 4 processors activated.
[    0.011420] CPU features: detected: 32-bit EL0 Support
[    0.011426] CPU features: detected: 32-bit EL1 Support
[    0.011433] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.011440] CPU features: detected: Common not Private translations
[    0.011446] CPU features: detected: CRC32 instructions
[    0.011454] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.011460] CPU features: detected: LSE atomic instructions
[    0.011467] CPU features: detected: Privileged Access Never
[    0.011472] CPU features: detected: RAS Extension Support
[    0.011480] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.011680] CPU: All CPU(s) started at EL2
[    0.011690] alternatives: applying system-wide alternatives
[    0.018703] devtmpfs: initialized
[    0.043022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.043067] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.050513] pinctrl core: initialized pinctrl subsystem
[    0.052074] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.053562] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.053860] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.054322] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.054394] audit: initializing netlink subsys (disabled)
[    0.054668] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[    0.055859] thermal_sys: Registered thermal governor 'fair_share'
[    0.055873] thermal_sys: Registered thermal governor 'step_wise'
[    0.055881] thermal_sys: Registered thermal governor 'user_space'
[    0.055887] thermal_sys: Registered thermal governor 'power_allocator'
[    0.056011] cpuidle: using governor ladder
[    0.056055] cpuidle: using governor menu
[    0.056225] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.056403] ASID allocator initialised with 65536 entries
[    0.056586] Serial: AMBA PL011 UART driver
[    0.070402] platform fe060000.dsi: Fixed dependency cycle(s) with /dsi@fe060000/panel@0/ports/port@0/endpoint@0
[    0.070459] platform fe060000.dsi: Fixed dependency cycle(s) with /vop@fe040000/ports/port@1/endpoint@4
[    0.071201] platform fe0a0000.hdmi: Fixed dependency cycle(s) with /vop@fe040000/ports/port@0/endpoint@2
[    0.101208] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.101769] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[    0.102289] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.102640] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[    0.103026] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.103363] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[    0.103820] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.104153] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[    0.104661] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.104987] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[    0.108961] platform hdmi-con: Fixed dependency cycle(s) with /hdmi@fe0a0000/ports/port@1/endpoint
[    0.117073] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.117097] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.117108] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.117114] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.117123] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.117130] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.117137] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.117143] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.118549] cryptd: max_cpu_qlen set to 1000
[    0.119758] fbcon: Taking over console
[    0.121840] iommu: Default domain type: Translated
[    0.121857] iommu: DMA domain TLB invalidation policy: strict mode
[    0.122222] SCSI subsystem initialized
[    0.122550] usbcore: registered new interface driver usbfs
[    0.122604] usbcore: registered new interface driver hub
[    0.122657] usbcore: registered new device driver usb
[    0.123503] mc: Linux media interface: v0.10
[    0.123585] videodev: Linux video capture interface: v2.00
[    0.123985] EDAC MC: Ver: 3.0.0
[    0.124877] scmi_core: SCMI protocol bus registered
[    0.126830] clocksource: Switched to clocksource arch_sys_counter
[    0.127161] VFS: Disk quotas dquot_6.6.0
[    0.127215] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.127955] AppArmor: AppArmor Filesystem Enabled
[    0.141328] NET: Registered PF_INET protocol family
[    0.142128] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.150085] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.150177] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.150207] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.150767] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.153026] TCP: Hash tables configured (established 65536 bind 65536)
[    0.153231] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.153396] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.153822] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.154384] Unpacking initramfs...
[    0.155360] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[    0.157154] kvm [1]: IPA Size Limit: 40 bits
[    0.157196] kvm [1]: GICv3: no GICV resource entry
[    0.157206] kvm [1]: disabling GICv2 emulation
[    0.157234] kvm [1]: GIC system register CPU interface enabled
[    0.157271] kvm [1]: vgic interrupt IRQ9
[    0.157324] kvm [1]: VHE mode initialized successfully
[    0.161975] Initialise system trusted keyrings
[    0.162301] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[    0.214638] NET: Registered PF_ALG protocol family
[    0.214695] Key type asymmetric registered
[    0.214705] Asymmetric key parser 'x509' registered
[    0.215149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.215228] io scheduler mq-deadline registered
[    0.215240] io scheduler kyber registered
[    0.253782] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.253815] dma-pl330 fe530000.dma-controller:      DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.261999] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.262030] dma-pl330 fe550000.dma-controller:      DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.277782] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.284679] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 29, base_baud = 1500000) is a 16550A
[    0.287552] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 30, base_baud = 1500000) is a 16550A
[    0.287885] printk: console [ttyS2] enabled
[    0.298734] rockchip-vop2 fe040000.vop: Adding to iommu group 2
[    0.327937] loop: module loaded
[    0.329305] zram: Added device: zram0
[    0.335384] tun: Universal TUN/TAP device driver, 1.6
[    0.336637] VFIO - User Level meta-driver version: 0.3
[    0.343473] usbcore: registered new interface driver cdc_acm
[    0.343503] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.343727] usbcore: registered new interface driver usb-storage
[    0.344188] usbcore: registered new interface driver usbserial_generic
[    0.344387] usbserial: USB Serial support registered for generic
[    0.353687] i2c_dev: i2c /dev entries driver
[    0.357024] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[    0.359402] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/regulators/BOOST
[    0.361281] rk808 0-0020: chip id: 0x8170
[    0.378209] rk808-regulator rk808-regulator.1.auto: there is no dvs0 gpio
[    0.378258] rk808-regulator rk808-regulator.1.auto: there is no dvs1 gpio
[    0.390604] vccio_acodec: Bringing 600000uV into 3300000-3300000uV
[    0.399096] vcc1v8_dvp: Bringing 600000uV into 1800000-1800000uV
[    0.401732] vcc2v8_dvp: Bringing 600000uV into 2800000-2800000uV
[    0.404385] boost: Bringing 4700000uV into 5000000-5000000uV
[    0.414351] rk808-rtc rk808-rtc.3.auto: registered as rtc0
[    0.415281] rk808-rtc rk808-rtc.3.auto: setting system clock to 2023-09-03T00:01:50 UTC (1693699310)
[    0.523424] Goodix-TS 1-005d: ID 911, version: 1060
[    0.555596] device-mapper: uevent: version 1.0.3
[    0.555978] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.559614] sdhci: Secure Digital Host Controller Interface driver
[    0.559639] sdhci: Copyright(c) Pierre Ossman
[    0.559646] Synopsys Designware Multimedia Card Interface Driver
[    0.562072] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.566150] ledtrig-cpu: registered to indicate activity on CPUs
[    0.567601] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
[    0.568067] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    0.568168] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    0.571393] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.571785] hid: raw HID events driver (C) Jiri Kosina
[    0.575735] usbcore: registered new interface driver usbhid
[    0.575763] usbhid: USB HID core driver
[    0.585429] Initializing XFRM netlink socket
[    0.585500] NET: Registered PF_PACKET protocol family
[    0.585816] Key type dns_resolver registered
[    0.593686] Freeing initrd memory: 7912K
[    0.598616] Goodix-TS 1-005d: Direct firmware load for goodix_911_cfg.bin failed with error -2
[    0.603999] input: Goodix Capacitive TouchScreen as /devices/platform/fe5a0000.i2c/i2c-1/1-005d/input/input0
[    0.642306] registered taskstats version 1
[    0.642698] Loading compiled-in X.509 certificates
[    0.657498] Key type .fscrypt registered
[    0.657525] Key type fscrypt-provisioning registered
[    0.657727] AppArmor: AppArmor sha1 policy hashing enabled
[    0.699614] dw-mipi-dsi-rockchip fe060000.dsi: Failed to create device link (0x180) with vcc_3v3
[    0.701857] vcc3v3_sd enforce active low on GPIO handle
[    0.719506] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
[    0.720844] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    0.721776] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[    0.722545] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
[    0.723358] rockchip-drm display-subsystem: bound fe060000.dsi (ops dw_mipi_dsi_rockchip_ops)
[    0.724768] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[    0.724939] ------------[ cut here ]------------
[    0.724954] WARNING: CPU: 1 PID: 50 at drivers/gpu/drm/drm_mode_object.c:45 drm_mode_object_add+0x90/0x98
[    0.724991] Modules linked in:
[    0.725009] CPU: 1 PID: 50 Comm: kworker/u8:1 Not tainted 6.3.0-2-danctnix #1
[    0.725024] Hardware name: Pine64 PineTab2 v2.0 (DT)
[    0.725034] Workqueue: events_unbound deferred_probe_work_func
[    0.725058] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.725071] pc : drm_mode_object_add+0x90/0x98
[    0.725086] lr : drm_property_create+0xd0/0x188
[    0.725102] sp : ffff8000099f35b0
[    0.725109] x29: ffff8000099f35b0 x28: ffff000103cdd780 x27: 0000000000000037
[    0.725133] x26: 0000000000001000 x25: 0000000000001000 x24: ffff000102385800
[    0.725155] x23: ffff800008f160c0 x22: 0000000000000004 x21: 00000000b0b0b0b0
[    0.725176] x20: ffff000103f02c90 x19: ffff000102385800 x18: ffff8000099dd110
[    0.725198] x17: 206d657473797362 x16: 75732d79616c7073 x15: ffff8000099f3550
[    0.725219] x14: ffff000103f02ff0 x13: ffff000103f02fd4 x12: 0000000000000000
[    0.725240] x11: 0000000000000001 x10: 0000000000000078 x9 : 0000000000000000
[    0.725260] x8 : ffff000103f02d80 x7 : 0000000000000000 x6 : 000000000000003f
[    0.725280] x5 : 0000000000000040 x4 : ffff8000099f35c0 x3 : 0000000000000000
[    0.725301] x2 : 00000000b0b0b0b0 x1 : ffff000103f02c90 x0 : 0000000000000001
[    0.725321] Call trace:
[    0.725329]  drm_mode_object_add+0x90/0x98
[    0.725345]  drm_property_create+0xd0/0x188
[    0.725358]  drm_property_create_enum+0x30/0x94
[    0.725370]  drm_connector_set_panel_orientation+0x94/0xb4
[    0.725386]  boe_get_modes+0x70/0xbc
[    0.725402]  drm_panel_get_modes+0x28/0x48
[    0.725417]  panel_bridge_connector_get_modes+0x1c/0x2c
[    0.725432]  drm_helper_probe_single_connector_modes+0x1a4/0x52c
[    0.725444]  drm_client_modeset_probe+0x204/0x1194
[    0.725458]  __drm_fb_helper_initial_config_and_unlock+0x54/0x494
[    0.725472]  drm_fb_helper_initial_config+0x4c/0x60
[    0.725485]  drm_fbdev_client_hotplug+0x8c/0xd8
[    0.725498]  drm_fbdev_generic_setup+0x90/0x170
[    0.725511]  rockchip_drm_bind+0x1ec/0x208
[    0.725528]  try_to_bring_up_aggregate_device+0x170/0x1c0
[    0.725547]  __component_add+0xa8/0x174
[    0.725561]  component_add+0x18/0x28
[    0.725576]  dw_mipi_dsi_rockchip_host_attach+0x5c/0x14c
[    0.725589]  dw_mipi_dsi_host_attach+0x98/0xcc
[    0.725603]  mipi_dsi_attach+0x2c/0x44
[    0.725616]  boe_dsi_probe+0xf8/0x1a0
[    0.725628]  mipi_dsi_drv_probe+0x24/0x34
[    0.725641]  really_probe+0x150/0x2b4
[    0.725656]  __driver_probe_device+0x7c/0xe8
[    0.725670]  driver_probe_device+0x40/0x164
[    0.725684]  __device_attach_driver+0xc4/0x144
[    0.725699]  bus_for_each_drv+0x88/0xe8
[    0.725713]  __device_attach+0xa0/0x190
[    0.725727]  device_initial_probe+0x18/0x28
[    0.725741]  bus_probe_device+0xb0/0xb4
[    0.725755]  deferred_probe_work_func+0x88/0xc4
[    0.725769]  process_one_work+0x1dc/0x340
[    0.725787]  worker_thread+0x224/0x434
[    0.725800]  kthread+0x10c/0x110
[    0.725813]  ret_from_fork+0x10/0x20
[    0.725829] ---[ end trace 0000000000000000 ]---
[    0.726035] ------------[ cut here ]------------
[    0.726047] WARNING: CPU: 1 PID: 50 at drivers/gpu/drm/drm_mode_object.c:242 drm_object_attach_property+0x6c/0xb8
[    0.726077] Modules linked in:
[    0.726091] CPU: 1 PID: 50 Comm: kworker/u8:1 Tainted: G        W          6.3.0-2-danctnix #1
[    0.726105] Hardware name: Pine64 PineTab2 v2.0 (DT)
[    0.726114] Workqueue: events_unbound deferred_probe_work_func
[    0.726135] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.726147] pc : drm_object_attach_property+0x6c/0xb8
[    0.726162] lr : drm_connector_set_panel_orientation+0x68/0xb4
[    0.726176] sp : ffff8000099f3650
[    0.726182] x29: ffff8000099f3650 x28: ffff000103cdd780 x27: 0000000000000037
[    0.726205] x26: 0000000000001000 x25: 0000000000001000 x24: ffff000102385800
[    0.726227] x23: 00000000fffffffd x22: ffff000101a45380 x21: ffff000102385800
[    0.726248] x20: ffff000102385238 x19: ffff000102385170 x18: ffff8000099dd0f8
[    0.726269] x17: 206d657473797362 x16: 75732d79616c7073 x15: ffff8000099f3550
[    0.726290] x14: ffff000103f02ff0 x13: ffff000103f02fd4 x12: 0000000000000000
[    0.726311] x11: 0000000000000001 x10: 0000000000000078 x9 : 0000000000000000
[    0.726331] x8 : ffff000103f02838 x7 : 00000000c0c0c0c0 x6 : 00000000c0c0c0c0
[    0.726352] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000006
[    0.726371] x2 : 0000000000000003 x1 : ffff000103f02c80 x0 : ffff0001023851b0
[    0.726394] Call trace:
[    0.726400]  drm_object_attach_property+0x6c/0xb8
[    0.726415]  boe_get_modes+0x70/0xbc
[    0.726430]  drm_panel_get_modes+0x28/0x48
[    0.726446]  panel_bridge_connector_get_modes+0x1c/0x2c
[    0.726460]  drm_helper_probe_single_connector_modes+0x1a4/0x52c
[    0.726473]  drm_client_modeset_probe+0x204/0x1194
[    0.726486]  __drm_fb_helper_initial_config_and_unlock+0x54/0x494
[    0.726500]  drm_fb_helper_initial_config+0x4c/0x60
[    0.726514]  drm_fbdev_client_hotplug+0x8c/0xd8
[    0.726526]  drm_fbdev_generic_setup+0x90/0x170
[    0.726538]  rockchip_drm_bind+0x1ec/0x208
[    0.726555]  try_to_bring_up_aggregate_device+0x170/0x1c0
[    0.726573]  __component_add+0xa8/0x174
[    0.726589]  component_add+0x18/0x28
[    0.726604]  dw_mipi_dsi_rockchip_host_attach+0x5c/0x14c
[    0.726618]  dw_mipi_dsi_host_attach+0x98/0xcc
[    0.726630]  mipi_dsi_attach+0x2c/0x44
[    0.726643]  boe_dsi_probe+0xf8/0x1a0
[    0.726655]  mipi_dsi_drv_probe+0x24/0x34
[    0.726668]  really_probe+0x150/0x2b4
[    0.726682]  __driver_probe_device+0x7c/0xe8
[    0.726696]  driver_probe_device+0x40/0x164
[    0.726709]  __device_attach_driver+0xc4/0x144
[    0.726724]  bus_for_each_drv+0x88/0xe8
[    0.726738]  __device_attach+0xa0/0x190
[    0.726751]  device_initial_probe+0x18/0x28
[    0.726764]  bus_probe_device+0xb0/0xb4
[    0.726776]  deferred_probe_work_func+0x88/0xc4
[    0.726789]  process_one_work+0x1dc/0x340
[    0.726805]  worker_thread+0x224/0x434
[    0.726817]  kthread+0x10c/0x110
[    0.726829]  ret_from_fork+0x10/0x20
[    0.726843] ---[ end trace 0000000000000000 ]---
[    1.448407] Console: switching to colour frame buffer device 160x50
[    1.475788] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    1.477241] panfrost fde60000.gpu: clock rate = 594000000
[    1.477293] panfrost fde60000.gpu: bus_clock rate = 500000000
[    1.480015] panfrost fde60000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
[    1.480129] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
[    1.480148] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
[    1.480162] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
[    1.480178] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
[    1.483450] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
[    1.495326] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    1.495386] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 1
[    1.495569] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    1.495666] xhci-hcd xhci-hcd.9.auto: irq 72, io mem 0xfd000000
[    1.495887] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    1.495912] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 2
[    1.495935] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[    1.497340] hub 1-0:1.0: USB hub found
[    1.497411] hub 1-0:1.0: 1 port detected
[    1.498300] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.499703] hub 2-0:1.0: USB hub found
[    1.499775] hub 2-0:1.0: 1 port detected
[    1.503765] input: adc-keys as /devices/platform/adc-keys/input/input2
[    1.504443] ehci-platform fd800000.usb: EHCI Host Controller
[    1.504478] ohci-platform fd840000.usb: Generic Platform OHCI controller
[    1.504501] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 3
[    1.504521] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 4
[    1.504680] ehci-platform fd800000.usb: irq 73, io mem 0xfd800000
[    1.504703] ohci-platform fd840000.usb: irq 74, io mem 0xfd840000
[    1.510805] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
[    1.510930] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
[    1.510947] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
[    1.511037] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 75,32 bit host data width,256 deep fifo
[    1.512134] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
[    1.514417] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    1.514519] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    1.514536] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    1.514634] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 76,32 bit host data width,256 deep fifo
[    1.516013] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
[    1.516052] mmc_host mmc2: card is non-removable.
[    1.517437] input: gpio-keys as /devices/platform/gpio-keys/input/input3
[    1.518909] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[    1.520275] hub 3-0:1.0: USB hub found
[    1.520378] hub 3-0:1.0: 1 port detected
[    1.521569] dw-apb-uart fe660000.serial: forbid DMA for kernel console
[    1.522943] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    1.542865] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[    1.568002] hub 4-0:1.0: USB hub found
[    1.568079] hub 4-0:1.0: 1 port detected
[    1.620294] mmc1: new HS200 MMC card at address 0001
[    1.621588] mmcblk1: mmc1:0001 SPeMMC 116 GiB
[    1.627264]  mmcblk1: p1 p2
[    1.628762] mmcblk1boot0: mmc1:0001 SPeMMC 4.00 MiB
[    1.631646] mmcblk1boot1: mmc1:0001 SPeMMC 4.00 MiB
[    1.633979] mmcblk1rpmb: mmc1:0001 SPeMMC 4.00 MiB, chardev (244:0)
[    1.735043] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    1.750230] Freeing unused kernel memory: 2304K
[    1.763034] Run /init as init process
[    1.763063]  with arguments:
[    1.763075]    /init
[    1.763088]  with environment:
[    1.763098]    HOME=/
[    1.763108]    TERM=linux
[    1.986919] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
[    2.110931] usb 4-1: new full-speed USB device number 2 using ohci-platform
[    2.361091] input: HID 1018:1006 as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.0/0003:1018:1006.0001/input/input4
[    2.419685] hid-generic 0003:1018:1006.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 1018:1006] on usb-fd840000.usb-1/input0
[    2.462495] input: HID 1018:1006 Mouse as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:1018:1006.0002/input/input5
[    2.462979] input: HID 1018:1006 Touchpad as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:1018:1006.0002/input/input6
[    2.463337] input: HID 1018:1006 System Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:1018:1006.0002/input/input7
[    2.523404] input: HID 1018:1006 Consumer Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:1018:1006.0002/input/input8
[    2.524829] hid-multitouch 0003:1018:1006.0002: input,hidraw1: USB HID v1.11 Mouse [HID 1018:1006] on usb-fd840000.usb-1/input1
[    2.906600] EXT4-fs (mmcblk1p2): mounted filesystem fd81b132-4bd6-40ff-8dfd-a31528d2d405 with ordered data mode. Quota mode: none.
[    3.904587] NET: Registered PF_INET6 protocol family
[    3.905522] Segment Routing with IPv6
[    3.905559] In-situ OAM (IOAM) with IPv6
[    4.002745] systemd[1]: systemd 253.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE)
[    4.002797] systemd[1]: Detected architecture arm64.
[    4.015476] systemd[1]: Hostname set to <danctnix>.
[    4.221400] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported
[    4.222961] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[    4.870964] systemd[1]: Queued start job for default target Graphical Interface.
[    4.894448] systemd[1]: Created slice Slice /system/getty.
[    4.908522] systemd[1]: Created slice Slice /system/modprobe.
[    4.920361] systemd[1]: Created slice Slice /system/serial-getty.
[    4.932634] systemd[1]: Created slice Slice /system/systemd-fsck.
[    4.944057] systemd[1]: Created slice User and Session Slice.
[    4.955656] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.967769] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.979243] systemd[1]: Reached target Local Integrity Protected Volumes.
[    4.991224] systemd[1]: Reached target Remote File Systems.
[    5.003045] systemd[1]: Reached target Slice Units.
[    5.015052] systemd[1]: Reached target Swaps.
[    5.027260] systemd[1]: Reached target Local Verity Protected Volumes.
[    5.039776] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.052560] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.074196] systemd[1]: Listening on Process Core Dump Socket.
[    5.088709] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.100556] systemd[1]: Listening on Journal Socket.
[    5.115933] systemd[1]: Listening on udev Control Socket.
[    5.119061] systemd[1]: Listening on udev Kernel Socket.
[    5.147668] systemd[1]: Mounting Huge Pages File System...
[    5.159087] systemd[1]: Mounting POSIX Message Queue File System...
[    5.173215] systemd[1]: Mounting Kernel Debug File System...
[    5.175513] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[    5.185886] systemd[1]: Mounting Temporary Directory /tmp...
[    5.197338] systemd[1]: Starting Create List of Static Device Nodes...
[    5.206330] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    5.228558] systemd[1]: Starting Load Kernel Module configfs...
[    5.240236] systemd[1]: Starting Load Kernel Module dm_mod...
[    5.250616] systemd[1]: Starting Load Kernel Module drm...
[    5.261214] systemd[1]: Starting Load Kernel Module fuse...
[    5.271189] systemd[1]: Starting Load Kernel Module loop...
[    5.272843] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    5.285422] systemd[1]: Starting Journal Service...
[    5.298127] systemd[1]: Starting Load Kernel Modules...
[    5.315262] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    5.319862] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.347449] systemd[1]: Starting Coldplug All udev Devices...
[    5.359823] systemd-journald[2076]: Collecting audit messages is disabled.
[    5.366049] EXT4-fs (mmcblk1p2): re-mounted fd81b132-4bd6-40ff-8dfd-a31528d2d405. Quota mode: none.
[    5.379104] systemd[1]: Mounted Huge Pages File System.
[    5.381416] systemd[1]: Mounted POSIX Message Queue File System.
[    5.383604] systemd[1]: Mounted Kernel Debug File System.
[    5.385489] systemd[1]: Mounted Temporary Directory /tmp.
[    5.388043] systemd[1]: Finished Create List of Static Device Nodes.
[    5.391607] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    5.392262] systemd[1]: Finished Load Kernel Module configfs.
[    5.396803] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    5.397538] systemd[1]: Finished Load Kernel Module dm_mod.
[    5.401907] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    5.402583] systemd[1]: Finished Load Kernel Module drm.
[    5.408387] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    5.409112] systemd[1]: Finished Load Kernel Module loop.
[    5.411970] systemd[1]: Finished Load Kernel Modules.
[    5.424350] systemd[1]: Finished Remount Root and Kernel File Systems.
[    5.443823] fuse: init (API version 7.38)
[    5.455468] systemd[1]: Mounting Kernel Configuration File System...
[    5.456482] systemd[1]: First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    5.460084] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    5.464212] systemd[1]: Starting Load/Save OS Random Seed...
[    5.483217] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    5.487171] systemd[1]: Starting Apply Kernel Variables...
[    5.499449] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[    5.503298] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.519051] systemd[1]: Starting Setup Virtual Console...
[    5.538665] systemd[1]: Started Journal Service.
[    5.668106] systemd-journald[2076]: Received client request to flush runtime journal.
[    5.673074] systemd-journald[2076]: File /var/log/journal/81ffa96764264fbc8ce74389a3e9d53d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    7.801266] ov5648 2-0036: failed to find 168000000 clk rate in endpoint link-frequencies
[    7.872776] iio iio:device1: interrupts on the falling edge or active low level
[    8.082876] random: crng init done
[    8.624183] hantro-vpu fdea0000.video-codec: Adding to iommu group 0
[    8.624925] hantro-vpu fdea0000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video0
[    8.625560] hantro-vpu fdee0000.video-codec: Adding to iommu group 1
[    8.626978] hantro-vpu fdee0000.video-codec: registered rockchip,rk3568-vepu-enc as /dev/video1
[    8.722968] input: PineTab Headphones as /devices/platform/rk817-sound/sound/card0/input9
[    9.064218] zram0: detected capacity change from 0 to 6306936
[    9.094024] Adding 3153464k swap on /dev/zram0.  Priority:100 extents:1 across:3153464k SS
[  18.911969] platform hdmi-sound: deferred probe pending
[  51.348199] systemd-journald[2076]: File /var/log/journal/81ffa96764264fbc8ce74389a3e9d53d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
  Reply


Messages In This Thread
SOLVED: New PineTab2 not booting properly. SECONDARY PROBLEM SOLVED: Not updating - by bacon_dude - 09-01-2023, 11:46 PM
RE: New PineTab2 not booting properly. - by tllim - 09-05-2023, 05:47 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Pinetab2 not starting Corconegre 6 1,495 03-18-2024, 10:47 AM
Last Post: zogkarndon
  Pinetab2 Audio Hiss/Static from speakers scottgr 2 352 03-16-2024, 11:56 AM
Last Post: scottgr
  pinetab2 hardware is not very good lmartin 11 2,187 01-13-2024, 03:45 AM
Last Post: Darth-Apple
Information nvme ssd and open pinetab2 snock 0 185 01-12-2024, 06:37 PM
Last Post: snock
  Pinetab2 screen removal Corconegre 5 1,275 01-10-2024, 08:08 AM
Last Post: stozi
  PineTab2, Ubuntu Touch and WiFI JMoore 2 549 01-07-2024, 10:58 AM
Last Post: JMoore
  Using the Pinetab2's PCIe slot FortunateFowl 0 298 12-22-2023, 01:23 PM
Last Post: FortunateFowl
Exclamation Pinetab2 Keyboard Issues lockedpotato 0 491 10-14-2023, 05:48 PM
Last Post: lockedpotato
  pinetab2 booting when adapter connected Ome Ko 16 2,678 09-15-2023, 11:45 PM
Last Post: Ome Ko
  PineTab2 screen won't turn back on until reboot KelsonV 3 982 08-23-2023, 09:08 AM
Last Post: diederik

Forum Jump:


Users browsing this thread: 1 Guest(s)