Write to an A1-rated Micro SD card failed
In our case most is solved , but one thing is strange..
We need half speed when writing card clock , but after that changing it back to full speed (50 Mhz atm) got it working.
AFAIK the clkdiv reg 0x0008 shouldn't have any effect without cardclock programmed, but from testing it has.

With our driver controller reports all speeds supported , but we are atm stuck with 3v3 signal voltage , and that means limit to 50Mhz.
The main driver needs modding for higher speed , and it would break OMAP port.. need to figure that out.


Messages In This Thread
RE: Write to an A1-rated Micro SD card failed - by mgrunditz - 05-21-2021, 06:36 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Both hinges completely failed phuzy 7 645 08-23-2021, 08:52 PM
Last Post: karlyn
Question Disassembling PineBook Pro Docking Deck (due to disappeared microSD card) gritibaenz 4 1,620 04-02-2021, 06:45 PM
Last Post: tkudog
  microSD card stuck charlesnorris 7 3,057 11-19-2020, 05:11 AM
Last Post: KC9UDX
  NVME SPI Update not booting SD Card WZ9V 5 2,878 10-18-2020, 08:36 PM
Last Post: wdt
  Upgrade eMMC card - boot problems alpopa 0 1,035 09-16-2020, 12:31 PM
Last Post: alpopa
  PBP not booting screen blank after SD card boot Jakobp 10 5,730 08-18-2020, 08:56 PM
Last Post: trinapicot
  Privacy switches - cutting power to wifi card as400 1 1,335 08-10-2020, 09:48 AM
Last Post: belfastraven
  SD card slot stefan.schumacher 1 1,484 03-28-2020, 04:34 PM
Last Post: zaius
  USB-C HUB: sd card slots and USB ports not usable vfr400racer 2 1,979 12-15-2019, 03:50 AM
Last Post: vfr400racer
  PCIe card success ? DrYak 0 1,053 11-12-2019, 01:16 PM
Last Post: DrYak

Forum Jump:

Users browsing this thread: 1 Guest(s)