OK, have got to the point where I can boot into either mobian or pmOS, but I don't get a gui on the phone for either of them!!! I can ssh in to either though.
I can't see any obvious problems in either log file which is irksome - need to try tweaking the kernel command lines a bit more but not sure what is best.
For the record mobian tries to map p1 to /boot in fstab so removed that, and for good measure (as I am running the f2fs version of mobian) I have added rootfstype=f2fs to the mobian start line in boot.conf.
@megous - I presume the p-boot partition (target of p-boot-conf, e.g. /dev/mmcblk0p1 on my PP SDcard) is not usable by us mere mortals? I can't even mount it. Also is dtb2 used by the released p-boot (in boot.conf) - I see you have it in the 13 system setup?
I can't see any obvious problems in either log file which is irksome - need to try tweaking the kernel command lines a bit more but not sure what is best.
For the record mobian tries to map p1 to /boot in fstab so removed that, and for good measure (as I am running the f2fs version of mobian) I have added rootfstype=f2fs to the mobian start line in boot.conf.
@megous - I presume the p-boot partition (target of p-boot-conf, e.g. /dev/mmcblk0p1 on my PP SDcard) is not usable by us mere mortals? I can't even mount it. Also is dtb2 used by the released p-boot (in boot.conf) - I see you have it in the 13 system setup?
- ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.2 kernel, Openbox desktop) for general purpose daily PC.
- PinePhone Pro Explorer Edition, daily driver, rk2aw & U-boot on SPI, Arch/SXMO & Arch/phosh on eMMC
- PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/SXMO on eMMC
