Dead PinePhone 64 - does not power on at all
01-21-2021, 02:19 PM
I suspect the battery is not getting charged, or is not holding a charge.
Are you plugging the charger direct into the phone (far preferable at this stage to via the dock)?
Do you have a multimeter to check the battery voltage before/after any period of charging?
Can you use another charger/cable?
It could also be that your bootable OS is no longer bootable. You say you started with Manjaro edition but have been booting Mobian - where is Mobian, on the eMMC or the SDcard? If SDcard, have you tried removing that and booting from the eMMC?
How about creating a Jumpdrive SDcard and plugging in the charger after inserting that card and the battery?
Are you plugging the charger direct into the phone (far preferable at this stage to via the dock)?
Do you have a multimeter to check the battery voltage before/after any period of charging?
Can you use another charger/cable?
It could also be that your bootable OS is no longer bootable. You say you started with Manjaro edition but have been booting Mobian - where is Mobian, on the eMMC or the SDcard? If SDcard, have you tried removing that and booting from the eMMC?
How about creating a Jumpdrive SDcard and plugging in the charger after inserting that card and the battery?
- PinePhone BraveHeart now v1.2b 3/32Gb daily driver, Tow-boot with pmOS/SXMO on eMMC
- PinePhone pmOS Community Edition 2/16Gb driving my picture frame, Tow-boot with pmOS/SXMO on eMMC
- PinePhone Pro Explorer Edition, Tow-boot on SPI, Arch/SXMO on eMMC
- ROCKPro64 v2.1 2GB, 16Gb eMMC retired in favour of a fruity upgrade
