12-02-2020, 07:59 AM
(12-01-2020, 06:58 PM)tulsums Wrote:(12-01-2020, 03:21 PM)tulsums Wrote:another detail. it's still charging. if I short press (2 sec) the power button the power led will turn amber for maybe 10 second then green for 1 or 2 then off. no boot.(12-01-2020, 01:31 PM)tophneal Wrote: sounds like the battery was drained all the way. Leave it charging for the better part of a day. (It's slow to fully recharge. from dead-dead, it can take about 8 hours to get to 30-50%, but that should be enough to boot it again.)mmm okay thanks. I will keep it on the charger for a while. I did try to disconnect the battery and connect the by pass cables to start from just the power cable. it didn't boot. Would that rule out your theory?
since sleep only works (okay-ish at that) with bsp uboot, it's probably wise to make it habit to shutdown your pbp after use, or make sure it's plugged in to charge.)
What's the total charge time been? The PBP can be very slow to recharge.
I'd like to say "yes" to that, but i'm not qualified to do so lol there's been similar instance I recall where people tried to bypass the battery, and in the end they still needed to charge the battery all the way.
Have you tried turning off the emmc and booting one of the BSP images from SD, like @KC9UDX suggested?
