Power consumption and suspend to ram

[User 18041]

Hi,

I am using the PBP with Manjaro KDE Plasma 20.10 (the last update).

I was following the steps from this forum page in order to be able to use the suspend to ram feature: https://forum.pine64.org/showthread.php?tid=10250
All the steps went fine, but after reboot the green light appears immediately and nothing else happens.

Can you please help?

1. Was I doing anything wrong? I have a 128GB emmc installed.
2. How can I recover from this state?

---

Hi,

I am using the PBP with Manjaro KDE Plasma 20.10 (the last update).

I was following the steps from this forum page in order to be able to use the suspend to ram feature: https://forum.pine64.org/showthread.php?tid=10250
All the steps went fine, but after reboot the green light appears immediately and nothing else happens.

Can you please help?

1. Was I doing anything wrong? I have a 128GB emmc installed.
2. How can I recover from this state?

And now I just did it again for my 64GB emmc
Installed uboot-pinebookpro-bsp (1.5-7), and ran
sudo dd if=/boot/idbloader.img of=/dev/mmcblk2 seek=64 conv=notrunc
sudo dd if=/boot/uboot.img of=/dev/mmcblk2 seek=16384 conv=notrunc
sudo dd if=/boot/trust.img of=/dev/mmcblk2 seek=24576 conv=notrunc

My 2 emmcs are not booting anymore.

I suppose that I can take them out, re-imagine them using my Mac and the SD-EMMC adapter + the Manjaro 20.10 image.
But I would like to recover them though, without reinstalling everything.

Can anyone help with a procedure on how to make them again to boot?

Thank you very much in advance.