PinePhone won't boot

[LinAdmin2]

I got the image from https://osdn.net/projects/manjaro-arm/st...ta2.img.xz
copied to sdcard using dd and upgraded afterwards with no problem.

I tried this image too and had the same issues as with the other images I tried so far.

There must me some funny glitch at a secret corner which IMHO can best be found if you start from scratch and exactly follow these steps:

a) Download mobian image from https://images.mobian-project.org/pineph...113.img.gz
b) Unpack that image and make sure there is no error message about corrupt data.
c) Copy the unpacked image to the card using dd with appropriate of=/dev/sdX for the card.
d) Run fsck -f /dev/sdX2 for the main partition of the card. Should be ok without errors.
e) Remove battery from phone, insert the card, assemble all and start the phone.
f) Cross your fingers, look to the sky and then to the phone

It will take some time for the first boot. If after 5 minutes you do not get the unlock screen, it might be necessary to restart the phone, but afterwards all should work as expected.