[SOLVED] Brand new pinephone bricked almost immediately out of box...
07-21-2020, 02:48 PM
(07-21-2020, 02:05 PM)Cree Wrote: Just got my new pinephone with ubports. Set it up, everything worked great. Then i decided to put a new sd card in. Literally brand new empty sd card. Immediately phone would no longer boot. Pine64 logo comes up, then there is a click sound (every time) then black screen. Sometimes with a redlight sometimes without. Have tried resetting, starting when plugged in, Flashed UB touch for pinephone to a new sd to attempt to boot from SD. No luck.
I haven't had much time to tinker, but the ubports edition should have ubports installed on the eMMC, so can you confirm the following:
- You've removed the plastic tab which stops the battery from connecting to the phone?
- Remove the SD card (the phone will naturally try boot from SD card first) and try to boot again?
- Install something like Manjaro or Mobian via balenaEtcher to both your SD cards, install each SD card for each try, have it on charge, wait for a few minutes, turn it on by holding the power button for 5 seconds, wait for a minute to boot.
- Sometimes it takes a minute just to show the boot logo.
- How are you charging it? Have you tried other chargers and cables?
Good luck