Bricked? Pinebook Pro using Uboot-pbp
06-24-2020, 10:33 AM
Fixed! 
First i turned off the eMMC and booted with a SD card with Manjaro.IMG
dit get to install it after about 5 times....
then i shut down again. then turned on the PBP, at the same moment (one second after reboot) i put the switch to ON, on eMMC.
i had to retry and retry meny meny times.
when i finaly after a lot of error messages, got the pbp up and running tryed "lsblk" to check that the eMMC was there, and it was.
downloaded the Manjaro.IMG.ZX and run the command "unxz Manjaro.img.xz to get the Manjaro.img
then i only had to "Sudo dd if=Manjaro.img of=/dev/mmcblk2"
When this was run after a long while. i took a shutdown, and now it woks!
Meny thanks for the help and tips!
First i turned off the eMMC and booted with a SD card with Manjaro.IMG
dit get to install it after about 5 times....
then i shut down again. then turned on the PBP, at the same moment (one second after reboot) i put the switch to ON, on eMMC.
i had to retry and retry meny meny times.
when i finaly after a lot of error messages, got the pbp up and running tryed "lsblk" to check that the eMMC was there, and it was.
downloaded the Manjaro.IMG.ZX and run the command "unxz Manjaro.img.xz to get the Manjaro.img
then i only had to "Sudo dd if=Manjaro.img of=/dev/mmcblk2"
When this was run after a long while. i took a shutdown, and now it woks!
Meny thanks for the help and tips!
