Booting from NVME

[ilovegentoo]

Hi all,

I finally bit the bullet and ordered a Intel 660p 512GB NVME SSD for testing my RockPro64 on it.
I downloaded the latest Ayufan Debian Buster build from https://github.com/ayufan-rock64/linux-b...m64.img.xz

I originally installed it on an SD card, then decided to copy it over to an USB stick (supposedly faster).

After that I again copied it over to the NVME drive.

The script I used for the migration is:

Code:

#!/bin/bash

# Parameters
source="/dev/disk/by-id/usb-Samsung_Flash_Drive_xxxxxxxxxxxxxxxx-0:0"
destination="/dev/disk/by-id/nvme-INTEL_xxxxxxxxxxxxxxxxxxxxxxxxx"
partitions=(1 2 3 4 5 6 7)
backupFolder="./backup"
rootid=7 # Root ID partition number

# Generate timestamp
timestamp=$(date +%Y%m%d%H%M)

# Create folder if not exist
mkdir -p $backupFolder

# Save GPT disks
sgdisk --backup=$backupFolder/$(basename $source)_$timestamp.sgdisk $source
sgdisk --backup=$backupFolder/$(basename $destination)_$timestamp.sgdisk $destination

# Copy $source layout to $dest and regenerate GUIDs
sgdisk --replicate=$destination $source
sgdisk -G $destination

# Clone partitions
for partition in "${partitions[@]}"; do
   echo "Clone partition $source-part$partition -> $destination-part$partition"
   dd if=$source-part$partition of=$destination-part$partition bs=1M status=progress
   echo "Cloned partition finished!"
done

# Must be done manually for now ...
#yes "-1MiB" | parted $destination resizepart $rootid
#e2fsck $destination-part$rootid
#resize2fs $destination-part$rootid

I then included the following modules and regenerated the initramfs:

cat /etc/initramfs-tools/modules

Code:

# List of modules that you want to include in your initramfs.
# They will be loaded at boot time in the order below.
#
# Syntax:  module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod
pcie_rockchip_host
phy_rockchip_pcie
nvme

update-initramfs -k all -u


I cannot book from NVME at the present moment. The onboard red LED stays lighted up.
If I put back the USB stick it boots normally.

Is there something I am forgetting ? Thank you