Issues with "recovery" button

[LANStrider]

Very useful info

Can you paste output of below command ?

Code:

cat /proc/mtd0

On Manjaro

Code:

[tux@pinebook ~]$ cat /proc/mtd dev:    size   erasesize  name mtd0: 01000000 00001000 "spi0.0" [tux@pinebook ~]$ mtdinfo Count of MTD devices:           1 Present MTD devices:            mtd0 Sysfs interface supported:      yes [tux@pinebook ~]$ sudo flash_unlock -i /dev/mtd0 [sudo] password for tux: Device: /dev/mtd0 Start: 0 Len: 0x1000000 Lock status: locked Return code: 1

On Armbian

Code:

tux@pinebook:~$ cat /proc/mtd dev:    size   erasesize  name mtd0: 003f8000 00001000 "loader" mtd1: 00008000 00001000 "env" mtd2: 00040000 00001000 "vendor" tux@pinebook:~$ mtdinfo Count of MTD devices:           3 Present MTD devices:            mtd0, mtd1, mtd2 Sysfs interface supported:      yes tux@pinebook:~$ sudo flash_unlock -i /dev/mtd0 [sudo] password for tux: flash_unlock: error!: could not check lock status device: /dev/mtd0              error 95 (Operation not supported) tux@pinebook:~$ sudo flash_unlock -i /dev/mtd1 flash_unlock: error!: could not check lock status device: /dev/mtd1              error 95 (Operation not supported) tux@pinebook:~$ sudo flash_unlock -i /dev/mtd2 flash_unlock: error!: could not check lock status device: /dev/mtd2              error 95 (Operation not supported)