(01-16-2020, 04:41 PM)Luke Wrote: This is an interesting post. How well do the speakers fit into the PBP case - I can' really tell from the picture. To make it more specific - I am curious about the height of the speakers. Thanks!
I've just edited my post to explain that. I neglected making a last inside pic of the mod, as I was distracted by some other things at the end. So I had to remove the side of the speaker sitting base, because new speakers were 2 mm thicker than old ones. Moving them about 3 mm closer to the PBP center was enough. The I used double sided tape for retention.
While I have not modified the shell speaker "grill", and some part of the speakers are not exposed the perforations, this does not affect sound levels, which are acceptable.
For my next test, I'll use some thinner and larger (maybe 3 to 4 cm) round or oval speakers, which should work well.
Will post again.
Cheers.
Creating is Everything
