bricked it?
01-07-2020, 08:35 AM
Hi Belfastraven,
Currently I have ChomeOS on the EMMC which freezes as soon as i try to play any video in the browser deemed unusable.
so I've tried to load Debian back on to the EMMC via SDcard but it boots past the SD and straight into Chrome again. thinking i might have a faulty card or flashed corrupted image (I don't have a EMMC usb adapter or the uart cable).
So i followed your instructions but i'm not sure if what i'm doing is correct, as i don't get any life from the laptop (no LED) when i try to power on with only the SD card in and the EMMC switch (24) is in the OFF position.
I know the follwoing was mentioned from another post by Tophneal....
"... If you have a USB c cable you can use rkflashtool to flash to your emmc. Refer to the wiki for the internal button that puts the PBP in mask tomorrow mode..."
https://forum.pine64.org/showthread.php?tid=8214
so is mask mode when the (24) switch is in the off position?
Cheers
PreMis
Currently I have ChomeOS on the EMMC which freezes as soon as i try to play any video in the browser deemed unusable.
so I've tried to load Debian back on to the EMMC via SDcard but it boots past the SD and straight into Chrome again. thinking i might have a faulty card or flashed corrupted image (I don't have a EMMC usb adapter or the uart cable).
So i followed your instructions but i'm not sure if what i'm doing is correct, as i don't get any life from the laptop (no LED) when i try to power on with only the SD card in and the EMMC switch (24) is in the OFF position.
I know the follwoing was mentioned from another post by Tophneal....
"... If you have a USB c cable you can use rkflashtool to flash to your emmc. Refer to the wiki for the internal button that puts the PBP in mask tomorrow mode..."
https://forum.pine64.org/showthread.php?tid=8214
so is mask mode when the (24) switch is in the off position?
Cheers
PreMis
