(01-01-2020, 07:51 PM)dhivael Wrote: two days in and it's already bricked! D:
after flashing a custom-built manjaro image to emmc, the pbp won't boot any more. not from emmc, but also not from sdcards (tried multiple) or usb sticks (tried multiple), neither with the default debian image nor with a stock manjaro image, regardless of whether emmc is enabled or disabled via the hardware switch (or even present). power led stays off, whether a uart cable is connected or not (or the uart is even enabled via switch).
looking at uart logs it seems that the chip doesn't even reach uboot. when booting with emmc disabled it comes out of DDR init just fine, but the boot stage isn't happy:
Code:Boot1: 2019-03-14, version: 1.19 CPUId = 0x0 ChipType = 0x10, 249 SdmmcInit=2 0 BootCapSize=100000 UserCapSize=59640MB FwPartOffset=2000 , 100000 mmc0:cmd5,20 mmc0:cmd7,10 mmc0:cmd5,20 mmc0:cmd7,10 mmc0:cmd5,20 mmc0:cmd7,10 SdmmcInit=0 1 StorageInit ok = 329828 SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit read PBA: 0x1404 SecureInit read PBA: 0x1804 SecureInit read PBA: 0x1c04 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT part: 0, name: IDBLoader, start:0x40, size:0x3fc0 GPT part: 1, name: U-Boot, start:0x4000, size:0x2000 GPT part: 2, name: TrustedFirmware-A, start:0x6000, size:0x2000 GPT part: 3, name: EFI, start:0x8000, size:0x64000 GPT part: 4, name: Boot, start:0x6c000, size:0xfa000 GPT part: 5, name: RootFS, start:0x166000, size:0x7315fdf no find partition:uboot. LoadTrust Addr:0x4000 LoadTrust Addr:0x4400 LoadTrust Addr:0x4800 LoadTrust Addr:0x4c00 LoadTrust Addr:0x5000 LoadTrust Addr:0x5400 LoadTrust Addr:0x5800 LoadTrust Addr:0x5c00 Addr:0x4000 No find trust.img! LoadTrustBL error:-3
emmc enabled stops even earlier:
Code:Boot1: 2019-03-14, version: 1.19 CPUId = 0x0 ChipType = 0x10, 251 mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000 mmc: ERROR: Card did not respond to voltage select! emmc reinit mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000 mmc: ERROR: Card did not respond to voltage select! emmc reinit mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000 mmc: ERROR: Card did not respond to voltage select! SdmmcInit=2 1 mmc0:cmd5,20 mmc0:cmd7,10 mmc0:cmd5,20 mmc0:cmd7,10 mmc0:cmd5,20 mmc0:cmd7,10 SdmmcInit=0 1 powerOn 68753
is this recoverable?
Yes, There are several Threads/Posts that can help you recover.
Same and similar problems
Though if this a brand new PBP, ? You may also want to check some of the other items :
If the eMMC is seated all the way, is the ribbon cable to the sd card slot secure.....
I opened my PBP before turning it on the first time, I found the eMMC was not all the way pushed into the socket.
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
**BCnAZ**
Donate to $upport
your favorite OS Team

bricked it?

