11-22-2019, 12:11 PM
Code:
Running STEP-2...
[*] Flashing touchpad firmware...
[*] Opening in touchpad mode
>>> Trying to open VID:258a PID:001f...
>>> Kernel Driver Active
>>> Writing offset:0 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:1024 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:2048 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:3072 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:4096 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:5120 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:6144 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:7168 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:8192 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:9216 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:10240 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:11264 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:12288 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:13312 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:14336 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:15360 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:16384 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:17408 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:18432 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:19456 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:20480 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:21504 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:22528 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:23552 length:1024...
>>> Verifying '1k-data'...
[*] Verifying 'end-program'...
[*] Verifying 'checksum'...
[*] Verifying 'program'...
[*] Finished succesfully!
>>> release interface
[*] Flashing keyboard firmware...
>>> Fix hex file
[*] Opening in user mode...
>>> Trying to open VID:258a PID:001e...
>>> Device not found
>>> Trying to open VID:258a PID:001f...
[*] Sending command to switch to boot mode...
[*] Command send
>>> release interface
[*] Opening in boot mode
>>> Trying to open VID:0603 PID:1020...
>>> Device not found
>>> Trying to open VID:0603 PID:1020...
>>> Device not found
>>> Trying to open VID:0603 PID:1020...
>>> Device not found
>>> Failed to open in boot mode
This doesn't look OK. And touchpad doesn't work.
Tried flashin second time, same result.
Anything I can try to solve this?