10-03-2019, 07:47 PM
(10-03-2019, 06:04 PM)Luke Wrote: @jaylittle 1) in /boot edit extlinux.conf with the desired resolution - see if that works (should be something like eDP: 1600x900 ) ; 2) will let @Mrfixit2001 know and include in an update (collecting feedback for now) ; 6) re. booting from NVMe the answer is yes and no. Yes, if you leave the /boot partition (with extlinux, kernel image, dtb) on eMMC and point extlinux to rootfs on NVMe. However, its a 'no' for booting the way SD, USB 2/3.0 and eMMC are bootable on RK3399, since PCIe which NVMe uses is not a part of the boot sequence on this SOC.
[edit] drafted info about bootable storage on wiki, will polish it up this week: https://wiki.pine64.org/index.php/Pinebo...le_Storage
Hi Luke,
I ordered the nvme adapter.
I read some comments for others members that they have major issues mounting the adapter + the SSD.
I would like to know if you have plans to work on a solution for this.
I don't know if it is possible get a "cable" extender to install the nvme adapter on the other site of the PBP, I saw a picture from one of the members and looks like there are a lot of room on the opposite side (next to the right speaker ).
