06-16-2018, 03:16 AM
After upgrading to the latest version of ubuntu from Ayufan Rock64 no longer boots.
I had a workaround by selection "previous kernel", but now I tried installing the latest kernel and previous kernel also no longer works.
Can anyone help me in the direction to use a different kernel from uboot? Could I just hook up a usb and tell it to boot a kernel I've downloaded to that?
I had a workaround by selection "previous kernel", but now I tried installing the latest kernel and previous kernel also no longer works.
Can anyone help me in the direction to use a different kernel from uboot? Could I just hook up a usb and tell it to boot a kernel I've downloaded to that?
Code:
Resetting CPU ...
DDR version 1.08 20170628
In
SRX
LPDDR3
333MHz
Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB
ddrconfig:7
OUT
U-Boot SPL 2017.09-ga0a2b48 (Apr 02 2018 - 16:01:39)
setup_ddr_param 1
booted from eMMC
Trying to boot from MMC1
NOTICE: BL31: v1.3(debug):9d3f591
NOTICE: BL31: Built : 14:39:02, Jan 17 2018
NOTICE: BL31:Rockchip release version: v1.3
tialized
INFO: Using opteed sec cpu_context!
INFO: boot t: pd status 0xe
INFO: BL31: Initializing runtime services
oting device without OPTEE initialization. SMC`s destined for OPe service opteed_fast
INFO: BL31: Preparing for EL3 exit to INFO: SPSR = 0x3c9
U-Boot 2017.09-ga0a2b48 (Apr 02 2018 - 16:01:54 +0000), Build: jenkins-linux-build-rock-64-209
Model: Pine64 Rock64
DRAM: 4 GiB
MMC: rksdmmc@ff520000: 0, rksdmmc@ff500000: 1
Card did not respond to voltage select!
mmc_init: -95, time 10
*** Warning - No block device, using default environment
In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: Pine64 Rock64
misc_init_r
cpuid=55524b50303930303900000000120918
serial=fdb482d7dd1a1b6
normal boot
Net: eth0: ethernet@ff540000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:6...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
688 bytes read in 4 ms (168 KiB/s)
select kernel
1: kernel-latest
2: kernel-previous
Enter choice: 1: kernel-latest
Retrieving file: /initrd.img
reading /initrd.img
6677437 bytes read in 932 ms (6.8 MiB/s)
Retrieving file: /Image
reading /Image
18995208 bytes read in 2640 ms (6.9 MiB/s)
append: rw root=LABEL=linux-root rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=be:68:6c2:d9 eth1addr=be:68:6c:57:b2:f9 serial=fdb482d7dd1a1b6 cgroup_enRetrieving file: /dtb
reading /dtb
56836 bytes read in 11 ms (4.9 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to fc8a3000, end fcf013bd ... OK
Loading Device Tree to 00000000fc892000, end 00000000fc8a2e03 ... OK
Starting kernel ...