04-18-2018, 09:12 PM
(04-18-2018, 10:40 AM)ace_baws Wrote: Hey, my Rock64 just came in the mail and I'm having the same issue. I tried with different OMV images and I can't get it to boot, only get all leds blinking. Have you found any solution to this? I'm using MicroSD.
I just hope it's not dead, it took a month to receive it
Thanks in advance
So there are three LEDs of importance... the green one near the power jack, and the white and red ones over near the reset button/raspberry pi header.
The green LED comes on when there is power applied to the board. Nothing more or less. so if it is going out, there is a major problem with the power supply, the board, or the connection to it.
The white one is the 'power' led, and the red one is the 'standby' led. They don't do much on the linux images other than both come on when the rock64 boots, and both turn off when it is shutdown. On android images IIRC the pwr led would go out and the sleep one would remain on if you put android on standby. They are both toggleable in the linux filesystem via /sys/devices/platform/leds/leds/ in recent versions. They don't "usually" blink though in operation, although I think disk-activity is a trigger that can be used if you want to use one like the hard drive indicator on laptops... and that wouldn't take effect until the os was starting up anyway.
