03-16-2016, 02:30 PM
(This post was last modified: 03-16-2016, 02:31 PM by Akazungu.
Edit Reason: Forgot to add something.
)
Mine's not going to look as good, but I just went to an online custom acrylic company (professionalplastics) and ordered some 4" x 6" sheets at 1/8" thickness. The company required a $30 min order, so I ordered 28 sheets in a pretty blue color. When I get them, I'll drill the screw holes in the corners, add some hex standoff screws and voila. Then, if I want to stack 2, 3, 9 of these up, I'll just add a sheet on top each time. Obviously this will be an open-sided solution.
I'm thinking of getting a 4-port KVM switch , so I can stack 4 of these up and run one of each OS.
I'm not one of the contributors so I have to wait a while for my board to arrive, but I'm all set for it now
.
I'm thinking of getting a 4-port KVM switch , so I can stack 4 of these up and run one of each OS.
I'm not one of the contributors so I have to wait a while for my board to arrive, but I'm all set for it now
.
