07-06-2017, 06:35 PM
(07-06-2017, 06:16 PM)rahlquist Wrote:(07-06-2017, 10:20 AM)xalius Wrote: Ayufan figured out how to add new mode lines to the current table of HDMI modes a while back by working around one of the binary blobs Allwinner left in the video driver. It is still a good bit of work to add more modes to the driver, but basically just someone needs to do it and test them now:
https://github.com/ayufan-pine64/linux-p...965950c9db Initial support for custom resolutions
https://github.com/ayufan-pine64/linux-p...24c8dd5edb Automatically calculate ptbl for hdmi bsp driver
Thanks for the lead. I was able to get my pine up and running using 720p on the one device I have here in my office using the android 6 image, the screen runs off the edges some. The 7 non tv image didnt work (but may have been my fault for not wiping the card after 6). 7tv version worked with 720p. I am trying 7 again after a full wipe of the card to see if it works this time.
hi rahlquist, its been a long time. Do drop by for a chat at some point.
As for your question, if you are using one of ayufan's android images then you can set one of the supported resolutions in uEnv per his instuctions.
In example:
Code:
disp_mode=1080p60