PINE64   ›   General   ›   Getting Started   ›   Sopine compatibility with Pi Compute

Thread Closed 
Sopine compatibility with Pi Compute
MarkHaysHarris777
Professor of The Pine
*****
Joined: Mar 2016
Posts: 1,948

Reputation: 148
#4
02-02-2017, 10:27 AM
(02-02-2017, 03:19 AM)mbt28 Wrote: No, It doesnt have a meaning. As far as I know sopine uses ddr3 socket cm ddr2.

However, designing a custom board should be relatively easier with sopine, if I would change one thing I would also put touch, DSI and CSI on module too. This could decrease pin number significantly.

There is not really enough room for that on the sopine card itself.  Its really packed with the three main chips and the SD card ...
marcushh777    Cool

please join us for a chat @  irc.pine64.xyz:6667   or ssl  irc.pine64.xyz:6697

( I regret that I am not able to respond to personal messages;  let's meet on irc! )
Thread Closed 


Messages In This Thread
RE: Sopine compatibility with Pi Compute - by MarkHaysHarris777 - 02-02-2017, 10:27 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  SOQUARTZ Compute module W does not fit Raspberry Pi CM4 dev board ihab 0 1,887 10-06-2022, 08:46 PM
Last Post: ihab
  Wi-Fi/Bluetooth for PINE64, Model: Sopine A64 lamson 0 2,052 08-24-2021, 08:17 AM
Last Post: lamson
  [PBP] USB 2.0 devices on left USB-A port compatibility elof 0 1,749 06-05-2021, 04:00 AM
Last Post: elof
  1 of 7 SoPINE compute modules not receiving DHCP lease ClusterMaker 2 3,926 09-08-2020, 03:03 AM
Last Post: Dippywood
  PSCI, u-boot and reboot on Sopine ClusterBoard hbaxmann 0 2,543 09-03-2019, 11:57 PM
Last Post: hbaxmann
  sopine cluster board install Smurfbot 1 4,838 03-31-2018, 04:09 AM
Last Post: pfeerick
  Sopine A64 doesn't boot ubuntu stixcher 5 8,689 12-03-2017, 11:05 AM
Last Post: tllim
  Turning off RPI GPIO 5v on boot (SOPine) TeknoRapture 1 3,293 03-31-2017, 02:48 PM
Last Post: xalius
  Would the SOPINE modules work if they were put into a standard SODIMM RAM slot? Wiooooo 4 7,407 02-05-2017, 02:57 PM
Last Post: MarkHaysHarris777

Forum Jump:


Users browsing this thread: 1 Guest(s)