ethernet does not work with Android 5.1.1 Image Release 20160711 (Known Problem)

[tllim]

how did you get past "script not found" error message. ?  isn't that a dd image and not phoenix? did you get that image here?
http://wiki.pine64.org/index.php/Main_Pa...e_Download

I did not get the 'script not found' error. I used the correct phoenix image. Hence was able to burn the image correctly on the sd card and boot pine64 board with it.

---

I placed another router/switch between pine64 and my modem and now the board acquired network connection and started working. Wonder why pine64 doesn't get ip address from my modem directly.

The switch you put I  between... Is that by any chance a 100mbit model as opposed to your modem doing 1Gb?
If so you probably impacted by the GbE issue described in the sticky topics here http://forum.pine64.org/forumdisplay.php?fid=39

I think it is a 100mbit switch. Hope this GbE issue gets fixed soon. I'll wait for the fix.

I'm afraid there will be no fix. The boards we have are broken. With the production line still producing broken boards.

We will release an Android 5.1.1 build with GbE fix tonight (Oct 25, PST). The GbE issue is the network packet loss issue and need to finetune the TX/RX delay value.