(08-06-2016, 08:30 PM)amc2012 Wrote:I had one working and one faulty board in the same environment, played around alot with the rx tx settings, lets wait for the master phy thing to be patched in,...(08-06-2016, 08:23 PM)waldo Wrote:(08-06-2016, 08:05 PM)cdslashetc Wrote: The only FREE solution. I bought V.TOP gigabit USB adapter for $13.99.
Sent from my Nexus 6 using Tapatalk
Bought and free is a bit weird...
And usb2 tops out at 480mbits.... That and probably some overhead and a lot of usb jitter.
Lets not waste time on discussions about usb adapters or 100mbit....
This just needs to get solved,...
... My hope atm is on the 'master' phy thing...
... Otherwise it might be time to accept a HW issue...
Ps also check olimex's try at an a64 board, they delayed theirs because of issues with GbE and the realtek phy
Amen, waldo.
I really do apologize for being snippy, but this is exactly the case - those who have the faulty boards already are either using Gig USB to get at least a small boost, or are using the workaround of ethtool to fast ethernet speeds.
My patience with this issue just wore thin today.
Heres olimexes explanation for their delay https://www.olimex.com/forum/index.php?topic=5365.0
Which... Umm...
predicts interesting times