07-26-2016, 06:54 AM
I finally got the printed off Playbox but something isn't right. No matter which way I have the LCD, both cables won't connect. If the PCB was sideways like the LCD then the cables would connect.
I can get the DS1 cable in one way and the TP cable in the other. I read that the cases are being made and will hopefully be delivered in August, I'll wait till then and hopefully all will fit.
I didn't have fun soldering the reset/power buttons in, two different solder brands didn't help, they were a pain to try and get the solder to stick.
![[Image: 20160726_221248_zps6rd26nys.jpg]](http://i1105.photobucket.com/albums/h357/Rockey70/20160726_221248_zps6rd26nys.jpg)
I can get the DS1 cable in one way and the TP cable in the other. I read that the cases are being made and will hopefully be delivered in August, I'll wait till then and hopefully all will fit.
I didn't have fun soldering the reset/power buttons in, two different solder brands didn't help, they were a pain to try and get the solder to stick.
![[Image: 20160726_221248_zps6rd26nys.jpg]](http://i1105.photobucket.com/albums/h357/Rockey70/20160726_221248_zps6rd26nys.jpg)
![[Image: 20160726_221155_zpslghwg6v0.jpg]](http://i1105.photobucket.com/albums/h357/Rockey70/20160726_221155_zpslghwg6v0.jpg)