05-14-2025, 08:43 AM
(05-13-2025, 11:54 AM)chbwzxgk Wrote: Thanks for the reply. My system is a little different from what you describe there. I have /usr/share/alsa/ucm2/PinePhonePro/ instead of /usr/share/alsa/ucm2/Rockchip/PinePhonePro/ and my configs were fairly different. You can see them here. https://gitlab.com/postmarketOS/pmaports...type=heads. I did try the configs from Biktorgj that you linked there (replacing the paths) but that completely broke sound.
There is a lot at play with getting the call audio to work.
On the EG25 modem,
Stock firmware is different then Biktorgj firmware. (I have Biktorgj firmware)
Your provider matters. With Biktorgj, you need to load the correct ADSP version for your provider.
Once you have the EG25 set correctly, then the audio configs are used.
I use the Biktorgj configs because I have Biktorgj firmware
In my early testing of the call audio, I ran into no sound and sound that was comparable to a train going by.
I know calls work on DanctNIX Arch with Phosh and Mobian when using the Biktorgj firmware and configs.
FYI, The popstmarket wiki has the PinePhonePro calls as partial working. You maybe on your own in trying to get it to work. Maybe all you need is to flash the Biktorgj firmware. (NOTE newer phones had some issues with flashing the Biktorgj firmware, look at other posts to find the answer)
https://wiki.postmarketos.org/wiki/Devices
