03-19-2025, 10:06 AM
So you've removed the eMMC and NVMe adaptor, and can't boot from Micro SD card?
There are only four possible things left;
1 The CPU is locked. If you have removed the battery and disconnected power that should solve this. Else, I think you have to hold the power button for 30 seconds.
2 Something is running from SPI ROM. You'll have to disable the ROM.
3 For some reason the micro SD cards you are making are not bootable. If you are using the correct NetBSD image, for the Pinebook Pro (not Pinebook) then as long as you are writing the image correctly and have a good SD card; it should work.
4 The hardware has failed. This is fairly unlikely.
There are only four possible things left;
1 The CPU is locked. If you have removed the battery and disconnected power that should solve this. Else, I think you have to hold the power button for 30 seconds.
2 Something is running from SPI ROM. You'll have to disable the ROM.
3 For some reason the micro SD cards you are making are not bootable. If you are using the correct NetBSD image, for the Pinebook Pro (not Pinebook) then as long as you are writing the image correctly and have a good SD card; it should work.
4 The hardware has failed. This is fairly unlikely.
:wq
