(11-24-2022, 09:20 AM)KC9UDX Wrote: Most of the ones I use are 8Gb. I'm not sure why a smaller one wouldn't work, but it may have something to do with the way Etcher works. Now that you have Manjaru working, you could use it to write an 8Gb card and see if that works. Also, it would be worthwhile to know if the 16Gb one you made still works. If it doesn't, that probably means that the U-boot that came with Manjaru will not allow you to boot from micro-SD card anymore.
Manjaro no longer works , I got to point I was so frustrated trying to get tow boot to work that I now have tried most every method I could find in the different forums. The last method was to Delete the UBOOT From EMMC- Manjaro.
But before I did that I made SPI.Installer.img SD cards 2-3 of them and none of them boot.
I also Inside of manjaro before I deleted the UBOOT from it, I deleted the SPI flash chip /dev/mtd0 and SPI SD won't boot. I also tried to direct write to it and tow boot will not boot from the SPI chip and it will not boot from SD card with spi.installer. and it will not boot if I write the Tow-BOOT...bin to the SPI chip directly either.
This was the last suggestion I tried, deleting UBOOT From the EMMC Manjaro . which is why manjaro does not boot now. it did not help. the SD cards with SPI do not boot up.
https://github.com/Tow-Boot/Tow-Boot/iss...1256913300
