04-20-2022, 05:01 AM
There's quite a lot of detail on the bootloader layout here:
https://bloggerbust.ca/post/how-to-updat...pinephone/
That explains the bs=1024 seek=8 at the end of the dd command given for installing u-boot given in multiple locations. It doesn't help with the size though, so it may be better to track down u-boot-sunxi-with-spl.bin or u-boot-sunxi-with-spl-pinephone.bin either in the backup filesystem (assuming it wasn't purged before you backed up) or from the old package.
https://bloggerbust.ca/post/how-to-updat...pinephone/
That explains the bs=1024 seek=8 at the end of the dd command given for installing u-boot given in multiple locations. It doesn't help with the size though, so it may be better to track down u-boot-sunxi-with-spl.bin or u-boot-sunxi-with-spl-pinephone.bin either in the backup filesystem (assuming it wasn't purged before you backed up) or from the old package.