09-16-2019, 08:27 AM
Anyone else problem with Armbian and getting no sound from the jack?
When I open a music stream and have a look in the volume control I see the graphic VU bar moving. Tried different stuff but can't find the solution from the problem.
I'm a total Linux n00b but I did find a command on the internet which I tried and said this:
master@rockpro64:/etc/alsa/conf.d$ aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
jack
JACK Audio Connection Kit
pulse
PulseAudio Sound Server
sysdefault:CARD=rkes8316hpsound
rk-es8316-hp-sound,
Default Audio Device
dmix:CARD=rkes8316hpsound,DEV=0
rk-es8316-hp-sound,
Direct sample mixing device
dsnoop:CARD=rkes8316hpsound,DEV=0
rk-es8316-hp-sound,
Direct sample snooping device
hw:CARD=rkes8316hpsound,DEV=0
rk-es8316-hp-sound,
Direct hardware device without any conversions
plughw:CARD=rkes8316hpsound,DEV=0
rk-es8316-hp-sound,
Hardware device with all software conversions
usbstream:CARD=rkes8316hpsound
rk-es8316-hp-sound
USB Stream Output
sysdefault:CARD=rkspdifsound
rk-spdif-sound,
Default Audio Device
dmix:CARD=rkspdifsound,DEV=0
rk-spdif-sound,
Direct sample mixing device
dsnoop:CARD=rkspdifsound,DEV=0
rk-spdif-sound,
Direct sample snooping device
hw:CARD=rkspdifsound,DEV=0
rk-spdif-sound,
Direct hardware device without any conversions
plughw:CARD=rkspdifsound,DEV=0
rk-spdif-sound,
Hardware device with all software conversions
usbstream:CARD=rkspdifsound
rk-spdif-sound
USB Stream Output
sysdefault:CARD=rkhdmidpsound
rk-hdmi-dp-sound,
Default Audio Device
dmix:CARD=rkhdmidpsound,DEV=0
rk-hdmi-dp-sound,
Direct sample mixing device
dsnoop:CARD=rkhdmidpsound,DEV=0
rk-hdmi-dp-sound,
Direct sample snooping device
hw:CARD=rkhdmidpsound,DEV=0
rk-hdmi-dp-sound,
Direct hardware device without any conversions
plughw:CARD=rkhdmidpsound,DEV=0
rk-hdmi-dp-sound,
Hardware device with all software conversions
usbstream:CARD=rkhdmidpsound
rk-hdmi-dp-sound
USB Stream Output
master@rockpro64:/etc/alsa/conf.d$
When I open a music stream and have a look in the volume control I see the graphic VU bar moving. Tried different stuff but can't find the solution from the problem.
I'm a total Linux n00b but I did find a command on the internet which I tried and said this:
master@rockpro64:/etc/alsa/conf.d$ aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
jack
JACK Audio Connection Kit
pulse
PulseAudio Sound Server
sysdefault:CARD=rkes8316hpsound
rk-es8316-hp-sound,
Default Audio Device
dmix:CARD=rkes8316hpsound,DEV=0
rk-es8316-hp-sound,
Direct sample mixing device
dsnoop:CARD=rkes8316hpsound,DEV=0
rk-es8316-hp-sound,
Direct sample snooping device
hw:CARD=rkes8316hpsound,DEV=0
rk-es8316-hp-sound,
Direct hardware device without any conversions
plughw:CARD=rkes8316hpsound,DEV=0
rk-es8316-hp-sound,
Hardware device with all software conversions
usbstream:CARD=rkes8316hpsound
rk-es8316-hp-sound
USB Stream Output
sysdefault:CARD=rkspdifsound
rk-spdif-sound,
Default Audio Device
dmix:CARD=rkspdifsound,DEV=0
rk-spdif-sound,
Direct sample mixing device
dsnoop:CARD=rkspdifsound,DEV=0
rk-spdif-sound,
Direct sample snooping device
hw:CARD=rkspdifsound,DEV=0
rk-spdif-sound,
Direct hardware device without any conversions
plughw:CARD=rkspdifsound,DEV=0
rk-spdif-sound,
Hardware device with all software conversions
usbstream:CARD=rkspdifsound
rk-spdif-sound
USB Stream Output
sysdefault:CARD=rkhdmidpsound
rk-hdmi-dp-sound,
Default Audio Device
dmix:CARD=rkhdmidpsound,DEV=0
rk-hdmi-dp-sound,
Direct sample mixing device
dsnoop:CARD=rkhdmidpsound,DEV=0
rk-hdmi-dp-sound,
Direct sample snooping device
hw:CARD=rkhdmidpsound,DEV=0
rk-hdmi-dp-sound,
Direct hardware device without any conversions
plughw:CARD=rkhdmidpsound,DEV=0
rk-hdmi-dp-sound,
Hardware device with all software conversions
usbstream:CARD=rkhdmidpsound
rk-hdmi-dp-sound
USB Stream Output
master@rockpro64:/etc/alsa/conf.d$