Pine64(+) will not boot

[pgarvey]

I've tried 2 different SD cards (Samsung Evo 32G), and 3 different power supplies (all 5.1v 2-2.5A).
Still just getting purple screen full of normal boot-up messages, at some point during start up it just freezes.
and leaves me with a screen full of boot messages.
freezes somewhere between 13.xxxxxx and 21.xxxxxx

do i have a bad pine?
can i get it replaced? (got mine via the kickstarter, this is my first time working with it)

[MarkHaysHarris777]

Please post your boot logs in a code block.

I suspect you're using the wrong image;  let's take a look at what the logs say.

[pfeerick]

Still just getting purple screen full of normal boot-up messages, at some point during start up it just freezes.
and leaves me with a screen full of boot messages.
freezes somewhere between 13.xxxxxx and 21.xxxxxx

As Marcus said, some boot logs, if you can get them, would be great. Can you also tell us what image you used, and if you had the ethernet connected? As older images used to wait for the ethernet to acquire a DHCP address before continuing with boot. You'll know if it is being a pain if you leave the board for five minutes... IIRC it's a 5 minute timeout.