02-28-2018, 10:31 AM
I have Debian Stretch Mate Community Build Image [microSD Boot] [0.5.15-136-20171222] flashed to a 256GB SD card and when trying to run sudo apt-et update, i get errors that there is no space left on the device: "Error writing to output file - write (28: No space left on device) Error writing to file - write (28: No space left on device) "
Running df I see this output:
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Feb 28 13:58:01 2018 from 192.168.111.122
rock64@rock64:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
udev 2007908 0 2007908 0% /dev
tmpfs 401960 10472 391488 3% /run
/dev/mmcblk1p7 261901060 261215864 0 100% /
tmpfs 2009784 0 2009784 0% /dev/shm
tmpfs 5120 4 5116 1% /run/lock
tmpfs 2009784 0 2009784 0% /sys/fs/cgroup
/dev/mmcblk1p6 102182 41642 60540 41% /boot/efi
tmpfs 401956 4 401952 1% /run/user/109
tmpfs 401956 0 401956 0% /run/user/1000
I get that /dev/mmcblk1p7 261901060 261215864 0 100% / shows 100% full but I am not sure if this is to be expected and I wont get to use a card like this for storage as well as the OS. I am a debian noob so if I flashed it wrong with Etcher or if I just need to use a smaller card and use the emmc port or USB3.0 for data storage tats fine. Just wanted to see what was to be expected.
Running df I see this output:
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Feb 28 13:58:01 2018 from 192.168.111.122
rock64@rock64:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
udev 2007908 0 2007908 0% /dev
tmpfs 401960 10472 391488 3% /run
/dev/mmcblk1p7 261901060 261215864 0 100% /
tmpfs 2009784 0 2009784 0% /dev/shm
tmpfs 5120 4 5116 1% /run/lock
tmpfs 2009784 0 2009784 0% /sys/fs/cgroup
/dev/mmcblk1p6 102182 41642 60540 41% /boot/efi
tmpfs 401956 4 401952 1% /run/user/109
tmpfs 401956 0 401956 0% /run/user/1000
I get that /dev/mmcblk1p7 261901060 261215864 0 100% / shows 100% full but I am not sure if this is to be expected and I wont get to use a card like this for storage as well as the OS. I am a debian noob so if I flashed it wrong with Etcher or if I just need to use a smaller card and use the emmc port or USB3.0 for data storage tats fine. Just wanted to see what was to be expected.