Xenial Images (Pinebook) 0.6.2-77

[cloudcine]

Special thanks to ayufan, Icenowy, lennyraposo, longsleep, lukasz, tkaiser, Xalius and PINE64 community contributors.

For release notes on all the Xenial Images (Pinebook) 0.6.2-77 below, please visit ayufan's GitHub.

Xenial Mate (Pinebook eMMC) 0.6.2-77
- THIS IS FOR eMMC!!!
- MD5 (XZ file): a945fa7e0e40eb6109c530d9815c20a3
- This build is based on ayufan's 0.6.2: jenkins-linux-build-pine-a64-77

Xenial Mate (Pinebook SDCard) 0.6.2-77
- THIS IS FOR SDCard BOOT!!!
- MD5 (XZ file): f7648c0a476f9b45356919f6ce5bac7c

Xenial Minimal Image (Pinebook SDCard) 0.6.2-77
- THIS IS FOR SDCard BOOT!!!
- MD5 (XZ file): 747f0833dd35969de499d081009ed7ae

i3 (Pinebook SDCard) 0.6.2-77
- THIS IS FOR SDCard BOOT!!!
- MD5 (XZ file): 11d8f75be9a1b337a27041a9ee7b55a6

I have used Etcher to successfully burn Xenial Mate 0.6.2-77 SDCard to my small SDCard.
But how to install Xenial Mate 0.6.2-77 emmc to my emmc in my pinebook?
What should I do ?

[erchache2000]

You need to update your sdcard install 0.6.x to lastest version https://github.com/ayufan-pine64/linux-build/releases

1- boot from your sdcard install.

2- perform on it
sudo ./pine64_update_kernel.sh 0.7.19
sudo ./pine64_update_uboot.sh 0.7.19
sudo ./pine64_update_package.sh 0.7.19

3- reboot with sdcard install upgrade and perform
sudo ./pine64_install_to_emmc.sh xenial-mate 0.7.19

more info in this thread... https://forum.pine64.org/showthread.php?tid=4644