Pinephone pro packet injection for internal wifi chipset
#1
Hello. Does anyone knows how to enable packet injection or monitor mode for internal wifi chipset of pinephone pro? OS is kali linux with Phosh.

Sent from my SM-A127F using Tapatalk
  Reply
#2
(06-29-2023, 09:34 AM)covar Wrote: Hello. Does anyone knows how to enable packet injection or monitor mode for internal wifi chipset of pinephone pro? OS is kali linux with Phosh.

Sent from my SM-A127F using Tapatalk

To my knowledge, this is not possible on the PinePhone Pro. It would require the firmware to support the two modes, which it doesn't and no released firmware does.
  Reply
#3
(07-01-2025, 09:19 PM)MustafaGoyette Wrote:
(08-13-2023, 04:40 AM)fxc Wrote:
(06-29-2023, 09:34 AM)covar Wrote: Hello. Does anyone knows how to enable packet injection or monitor mode for internal wifi chipset of pinephone pro? OS is kali linux with Phosh.

Sent from my SM-A127F using Tapatalk

To my knowledge, this is not possible on the PinePhone Pro. It would require the firmware to support the two modes, which it doesn't and no released firmware does.
So do you know how to solve that problem?

writing a new open source driver requires having a complete datasheet including the monitor mode instructions, you would need to get the info used to build the current driver and compare it with the documents released by the manufacturer.  Sometimes this requires decapping the IC and connecting logic probes and figuring out how the the chip works, this is how some FOSS drivers are made for popular hardware with weak documentation.  Is modern 802.11 hardware still vulnerable to deauth and packet injection attacks?  Monitor mode is always useful though.
  Reply
#4
(07-01-2025, 09:19 PM)MustafaGoyette Wrote:
(08-13-2023, 04:40 AM)fxc Wrote:
(06-29-2023, 09:34 AM)covar Wrote: Hello. Does anyone knows how to enable packet injection or monitor mode for internal wifi chipset of pinephone pro? OS is kali linux with Phosh.

Sent from my SM-A127F using Tapatalk

To my knowledge, this is not possible on the PinePhone Pro. It would require the firmware to support the two modes, which it doesn't and no released firmware does.
So do you know how to solve that problem?
What Kali Linux recommends you to do is to attach a supported (check the list first before you buy!) USB C WiFi dongle and to use that one. (And by "supported", I mean that it needs to supports monitor mode under GNU/Linux. Not every WiFi chipset that works in principle also works for monitor mode!)

I do not think there is any other solution. The kernel driver for the internal WiFi is Free Software, but the firmware that runs on the WiFi chip is not, and it does not support monitor mode, so the driver cannot support it.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  RTKLIB PinePhone Pro GPS jlaba 1 708 05-02-2025, 12:43 AM
Last Post: biketool
Question Are there plannes to create a new and more powerfull PinePhone Pro? Nima0908 1 757 04-10-2025, 03:52 AM
Last Post: Peter Gamma
  PinePhone Pro disable Volume Buttons when malfunctioning ArchBene 0 479 03-12-2025, 05:51 PM
Last Post: ArchBene
  PinePhone Pro Explorer's edition Qualcomm modem recovery shifras 11 6,541 02-28-2025, 07:03 AM
Last Post: tensa1000
  PinePhone Pro EDL boot by shorting contacts ozkenlc 3 3,034 09-18-2024, 04:59 AM
Last Post: biketool
  PinePhone's LED is blinking, but doesn't start zvavybir 0 736 09-06-2024, 02:39 AM
Last Post: zvavybir
  Pinephone pro shuts down immediately after login covar 4 2,667 07-03-2024, 10:59 AM
Last Post: covar
Thumbs Up Pinephone Pro + Keyboard for sale Jimmy88 2 2,442 04-22-2024, 08:38 PM
Last Post: AegisWages
  PinePhone only turns on sometimes zvavybir 1 1,544 03-27-2024, 12:19 PM
Last Post: zvavybir
Question Screen turning off and booting problems with the Pinephone Pro xnZwJR6vys9a2wm7yWE4 0 1,086 01-16-2024, 02:38 PM
Last Post: xnZwJR6vys9a2wm7yWE4

Forum Jump:


Users browsing this thread: 1 Guest(s)