So I am trying to help my sister in law put hers together while I await the arrival of mine. And we are having a hard time getting the ribbons to slot in for the touch pad.(there is a chance we are making it work but they aren't staying) Is there a trick to it? The last time I built a computer was a long time ago.

hi,

I am using pine64-image-debianmate-310101bsp.img.
I setup my 64 SD card on my Mac Pro.
Then I went to boot the Pine64, device powered up but I saw not boot sequence on the Dell display. It's an old 19" display. Should I have at least since the typical ASCII boot characters and info?

These are the steps I used to get myself in this mess...

Unmount the SD
TheM5:$ diskutil unmountDisk /dev/disk4
Unmount of all volumes on disk4 was successful
TheM5:$

unxz the image:
TheM5:$ ls *.xz
pine64-image-debianmate-310101bsp.img.xz
TheM5:$ unxz pine64-image-debianmate-310101bsp.img.xz

copy the image:
TheM5:$ sudo dd if=pine64-image-debianmate-310101bsp.img of=/dev/disk4 bs=1m
Password:
3684+0 records in
3684+0 records out
3862953984 bytes transferred in 451.011079 secs (8565098 bytes/sec)
TheM5:$


Then go boot the SD card in the Pine64
Nadda on the display. This is a working display I use it with my Raspberry Pi

What did I mess up?

thanks

Mike

Order #8161014.  It's only been over a month.  I ordered it on May 2nd.  When are you guys going to ship this?

Hey,
I saw some people with problems with Android.
It took me forever to figure out how to setup the sd. (On Mac)
I finally got it setup using Windows. The Phoenix one was very jerky and slow. I use the dd 64gig version and now it's smooth.
I played through the network 1080p videos with mkv container through kodi and no jerking.
I will be bitstreaming but working on the room it's going in right now.

I do get a weird cannot connect to server when trying to dl a benchmark. Coming out of standby required me to unplug and restart it.

Sent from my Nexus 6P using Tapatalk

Hello peoples....

I got a PINE64+ board coming with a Humidity Temperature Sensor.

Is there a way to directly connect the Humidity Temperature Sensor board to the PINE64+ without using the POT 12C Multiport? And if so, how to do it?

Linux

The wifi module works fine, but I'd like to use a cable. I've tried three cables, none have worked so far. Are there any recommended settings or drivers I could use/download to get it working ?

I received my Pine64 today, yayyy!!! Along with it came the WiFi/Bluetooth module and Humidity/Temp sensor I ordered on BackerKit. I have attached the WiFi module easily, but I do not understand where the Humidity/Temp sensor should go, should I have a cable for it? I am not sure if a cable should have come with my order, but if we have to buy one from the Pine shop that seems a bit unfair considering I have ordered the part, but I can't use it. If anyone has any knowledge that would be great.
Thanks, harveys300.

Hi,

I read on the Sunxi wiki that there is relative mainline support, but when i try https://github.com/apritzel/linux.git (a64-v5) it seems it doesn't have sd card support, my kernel hangs on Waiting for root device /dev/mmcblk0p2 any ideas?
[url=https://github.com/apritzel/linux.git][/url]

Thanks,
Jeroen

Hi - 

I do  understand this is a "kick starter" - things go wrong and are sort of screwed up because there is a big learning curve

I received an email on 27-may-2016 stating by kit has shipped (I ordered via kick starter, not the store)
EDIT: My backer number is: 14,220

I have not received my shipment, and the tracking number is not valid.

My card was charged on May 2, 2016
BackerKit (and email I received) It says it was shipped on May 27

I do not believe the confirmation number I have is valid - I have identical problems as others

1)  No tracking information for the shipment, or overdue tracking.  using: http://www.ems.com.cn/

2)  "Exipred" - using https://www.aftership.com/

3) I have verified my information on "pine64.backerkit.com" - 

What is my next step.

Thanks

Hi, I can't create the microsd with Phoenix Card, when I choose the *.img file the program says: "Script NOT found. Please use new version image". I try with Android, Xubuntu and Remix. Thanks.