battery power in android

[MarkHaysHarris777]

UnixOutlaw, please, settle down;

... the battery is powering ALL THREE of my PineA64 boards, no issues. I will tell you that you must have the power switch and the reset switch soldered on to the board, or, as Xalius has told you, you can also use the EXP header to connect the switches to the board via jumpers (but the point is that the switches must be solid, and they must be there!)

The battery takes 15 hours to fully change the first time... also, don't yank the power cord ! Get your switches in place, and then power on the unit with the battery connected. The power switch will not work to power on unless the battery IS connected.

Also, to power on you DONT click the power switch... that puts it to sleep. To power on you HOLD the power button for two seconds until the red light comes on and then about 1/2 second after that.

Visit us on chat for live help... we are here to assist you any way we can...