Stuck in bootloader
06-06-2022, 06:14 AM
(06-05-2022, 09:26 AM)MLG_Herobrine Wrote: Note: If I hold the power button, it shows the green, blue, and red cycles. I looked at the wiki, and don't understand exactly how to use these.
according to this info:
Quote:At startup, the bootloader displays a logo and its version:
Then, it waits for ~5s in case the user presses the button. The progress is shown by the color of the logo.
When the user just wants to run the current firmware, they won't touch the button, and the logo will be filled in green.
When the timeout is elapsed, MCUBoot will be run. It'll swap the firmware if needed and then run the firmware from the primary slot.
If the user presses the button until the logo is drawn in blue, the previous version of the firmware will be reverted.
If the user presses the button longer, until the logo is drawn in red, the recovery firmware will be loaded into the primary slot and will be run after the next reset.
also, maybe links or some steps from this post could be useful (try to install recovery firmware)
