How to get kernel boot messages on screen on Manjaro
#1
From a certain moment they can be seen if you change in boot.txt:

from:
console=ttyS2,1500000n8
to:
console=tty1

and remove the bootsplash part so the line reads:

setenv bootargs console=tty1 root=/dev/nvme0n1p2 rw rootwait  (I have my root on nvme - your root might be elsewhere !!!)

Than - ./mkscr and reboot.

This is necessary for encryption to be able to enter password for your encrypted device.
  Reply
#2
I did your steps and did not see any messages at boot.. then again i don't have encryption set up, so this might be why.
  Reply
#3
You should be seeing messages whether you have encryption or not.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Extracting a copy of SPI NOR flash contents using micro SD card and u-boot hmuller 0 63 09-21-2020, 11:24 AM
Last Post: hmuller
  Program SPI NOR Flash on Pinebook Pro with u-boot on micro SD Card hmuller 0 98 09-21-2020, 10:02 AM
Last Post: hmuller
  Manjaro ARM, Cryptomator, and MEGA Sync dp1kinobe 2 227 09-06-2020, 09:05 AM
Last Post: dp1kinobe
  Freepascal FPC3.20 and Lazarus IDE on Manjaro KDE dieselnutjob 0 206 08-02-2020, 06:57 AM
Last Post: dieselnutjob
  Installing WPS Office on Manjaro brent.thierens 5 1,191 07-13-2020, 03:13 AM
Last Post: brent.thierens
  kernel build script for latest mainline manjaro kernel xmixahlx 42 6,687 07-11-2020, 09:01 PM
Last Post: xmixahlx
  full disk encryption with luks on manjaro xfce limxr 48 7,510 07-09-2020, 07:27 AM
Last Post: JtR
  Is there a MMC upgrade instruction from debian-mate to manjaro factory (20.06)? pljanson 4 689 06-23-2020, 12:41 AM
Last Post: pljanson
  How to boot Manjaro from NVME with uboot on eMMC as400 47 6,486 06-07-2020, 02:37 AM
Last Post: as400
  Instructions for Installing VS Code on Manjaro clover 6 2,592 06-04-2020, 09:37 PM
Last Post: pfeerick

Forum Jump:


Users browsing this thread: 1 Guest(s)